HEIDENHAIN TNC 426B (280 472) ISO programming - Manual (Page 280)

HEIDENHAIN TNC 410, TNC 426, TNC 430 265
Programming example
Calculate an angle with arc tangent as opposite side (Q12) and
adjacent side (Q13); then store in Q25.
To select Q parameter functions, press the Q
key or the PARAMETER soft key.
<
For formula input, press the FORMULA soft key
Parameter number for result?
<
25 Enter the parameter number and confirm with
ENT
<
Shift the soft-key row and select the
arc tangent function.
<
Shift the soft-key row and open parentheses.
<
12 Enter Q parameter number 12.
<
Select division.
<
13 Enter Q parameter number 13.
<
Close parentheses and conclude
formula entry.
Example NC block
37 Q25 = ATAN (Q12/Q13)
1
0.8 Ent
er
ing F
o
rmulas Dir
ectly
Mkap10.pm6 29.06.2006, 08:06 265