H3C Technologies H3C S9500 Series Switches - Manual (Page 71)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 4 Switch Installation
4-2
4.3 Mounting the Switch in User-Supplied Cabinet
4.3.1 Cabinet Configuration Guideline
Caution:
z Even if no PoE external power supply is installed, you are recommended to reserve
the PoE power supply slot (just cover a 4 U blank filler panel) in the cabinet for later
PoE expansion.
z For components of 4 U or higher, such as chassis and PoE power supply, more
screws are required to secure the slide rails in the cabinet considering their weight.
z You can adjust the specific height of every slot as needed. The following guideline is
just for reference.
I. One S9505 chassis in a cabinet
The components and their height are as follows (from top down):
z Blank filler panel (2U)
z Cabling frame (2U)
z External PoE power supply (4U. It is blank filler panel if no external PoE power
supply is installed)
z Blank filler panel (1U)
z Backwards cabling frame (1U)
z S9505 chassis (11U)
z Blank filler panel (1U)
z Cabling frame (2U)