H3C Technologies H3C S9500 Series Switches - Manual (Page 45)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-4
2.3.2 Panel and LEDs
Figure 2-2 XP4 module panel
The XP4 module has two LEDs for each optical port on its panel.
Table 2-5 1000 Mbps optical port LEDs on the XP4 module
LED Status
OFF No link is present.
LINK
Green A link is present.
OFF No packets are transmitted/received on the port.
ACT
Orange blinking Packets are being transmitted/received on the port.
2.3.3 Matching Cable
The XP4 module provides four 10 Gbps XFP optical ports. For more details about XFP
optical modules, see Table 2-3.
2.4 XK1 Module
2.4.1 Specifications
The XK1 module provides one 10GE XENPAK/SC optical/electrical port.
Table 2-6 XK1 module specifications
Attribute XK1
CPU MPC8245
Boot ROM 512 KB
SDRAM 128 MB/256 MB
Dimensions (L
× W)
366.7
× 340 mm(14.4 × 13.4 in.)
Max. power consumption 45 W
Number of ports One
Connector XENPAK/SC
Rate 10 Gbps