H3C Technologies H3C S9500 Series Switches - Manual (Page 144)

Installation Manual
H3C S9500 Series Routing Switches
Appendix A Engineering Labels for Cables
A-10
5) The serial number on the HUB, the network port number of the agent and the
location of stand-alone server should be specified according to actual connection.
II. Example of the Label
Figure A-10 shows the label on the Etherent cable:
Figure A-10 Example of the label on the Ethernet cable
“A01-03-10-05” indicates that on the local end of the Ethernet cable is connected with
Ethernet Port 05, Slot 10, Frame 03 of the cabinet on Row A, Column 01 in the machine
room.
“B02-03-12” indicates that the opposite end of the Ethernet cable is connected with
Ethernet Port 12, Frame 03 of the cabinet on Row B, Column 02 in the machine room.
A.3 Engineering Labels for Optical Fibers
These labels are affixed to the optical fibers that connect the optical interfaces on the
boards in a frame, or on the device boxes. There are two types of labels for optical
fibers: one is for the fiber that connects the optical interfaces on two devices, the other
is for the fiber that connects the device and the Optical Distribution Frame (ODF).
A.3.1 Labels for the Fiber that Connects Two Devices
I. Meaning of the label
Table A-3 shows the information on both sides of the labels affixed to the optical fiber
that connects two devices.