H3C Technologies H3C S9500 Series Switches - Manual (Page 18)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 1 Product Overview
1-12
z
Route calculating and forwarding table maintenance.
z
Integrating Crossbar switching fabric to exchange the service between different
boards.
z
Providing system configuration and monitoring functions, which allows the system
to upgrade and reset service board software.
The S9500 series support these types of SRPU modules:
z
S9502: SRP1M1
z
S9505: SRP1N6,SRP1N7
z
S9508: SRP1N5,SRP1N7
z
S9512: SRP1N4,SRP1N7
I. SRP1N4 module
1) Specifications
The S9512 uses SRP1N4 modules. The following table summarizes the module
specifications.
Table 1-6 SRP1N4 module specifications
Attribute SRP1N4
CPU MPC755
Boot ROM 512 KB
SDRAM 512 MB (expandable to 1 GB)
Dimensions (L × W) 366.7 × 340 mm (14.4 × 13.4 in.)
Port
One Console port, for local configuration management
One AUX port, for remote dialup configuration
management
One 10Base-T/100Base-TX port for system management
and program upgrade
One RS232/485 port, for connecting external PoE power
frame when supported
One hot-swappable CF port
Max. power
consumption
60 W
2) SRP1N4 panel
The SRP1N4 module provides CF port, CF LED (CFS), 10Base-T/100Base-TX port,
RS232/485 port, Console port, AUX port, RESET button, LPU status LEDs, SRP1N4
status LEDs (SFS, ACT, ALM, RUN), as shown in Figure 1-11.
Figure 1-11 SRP1N4 panel