H3C Technologies H3C S9500 Series Switches - Manual (Page 34)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 1 Product Overview
1-28
The SRP1N7 module has 12 pairs of LEDs to indicate the operating status of 12 LPU
modules. Fore more details about the LEDs, see Table 1-13.
z
Status LEDs for the SRP1N7 module
You can learn the operating status of SRP1N7 module by reading the SFS, ACT, ALM
and RUN LEDs on it. Fore more details about the LEDs, see Table 1-14.
V. SRP1M1 module
1) Specifications
The S9502 uses SRP1M1 modules. The following table summarizes the module
specifications.
Table 1-39 SRP1M1 module specifications
Attribute SRP1M1
CPU MPC755
BootROM 512 KB
SDRAM 512 MB (expandable to 1 GB)
Dimensions (W x D) 366.7 × 340 mm (14.4 × 13.4 in)
Port
One Console port, for local configuration management
One AUX port, for remote dialup configuration
management
One 10Base-T/100Base-TX port, for software upgrade
and network management
One RS232/485 port, for connecting the external PoE
power frame when using PoE function; The RS485 port
supports the cascade connection of PoE power frame and
NEPS3500-AB when using PoE function and
NEPS3500-AB.
One hot-swappable CF port
Max power
consumption
60 W
2) Panel
The SRP1M1 module provides a CF port and CF LED (CFS), a 10Base-T/100Base-TX
port, RS232/485 port, Console port and AUX port, a RESET button, LPU status LEDs,
and SRP1M1 status LEDs (SFS, ACT, ALM, and RUN), as shown in Figure 1-15.
Figure 1-15 SRP1M1 panel