B.3 cabinet installation on raised floor – H3C Technologies H3C S9500 Series Switches User Manual
Page 164
Installation Manual
H3C S9500 Series Routing Switches
Appendix B Installation of B68 Cabinet
B-13
Figure B-13
Installation of two cabinets on the cement ground
B.3 Cabinet Installation on Raised Floor
When the B68-22 cabinet is installed in the equipment room with the raised floor, the
H800 series supports are adopted.
Caution:
The feet are insulated. The anchor plate components include insulating units. During
construction, make sure that the insulating units are correctly installed so that the whole
set of equipment is insulated from the ground before the ground wire is connected, thus
effectively meeting the insulation requirement.
This manual is related to the following products:
- H3C S7500E Series Switches H3C S7500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S5500 Series Switches H3C S5120 Series Switches H3C S3610[S5510] Series Switches H3C S3600 Series Switches H3C S3100 Series Switches OAA For Routers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSQM1WCMB0 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA2600 Series WLAN Access Points H3C WA2200 Series WLAN Access Points H3C SecPath F1000-E H3C SecPath F1000-A H3C SecPath F1000-S H3C SecPath F100-A H3C SecPath F100-C-EI H3C SecPath V100-E H3C SecCenter iTAS H3C Device Manager