H3C Technologies H3C S9500 Series Switches - Manual (Page 42)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-1
Chapter 2 LPU Modules
2.1 Overview
The S9500 series are modular switches that are designed following industry standards.
The series can be equipped with these types of LPU modules:
z XP2 module: provides two 10GEBase-R XFP/LC/10GEBase-W XFP/LC optical
ports
z XP4 module: provides four 10GE XFP/LC optical ports (1:2 convergence)
z XK1 module: provides one 10 GE XENPAK/SC optical/electrical port
z GP12 module: provides 12
× 1000 Mbps SFP/LC electrical/optical ports
z GP24 module: provides 24
× 1000 Mbps SFP/LC optical ports
z FP20 module: provides 20
× 100 Mbps SFP/LC optical ports
z F32G module: provides four 1000 Mbps SFP/LC optical ports and 32
× 10/100
Mbps auto-sensing RJ-45 ports
z GT24 module: provides 24
× 10/100/1000 Mbps auto-sensing RJ-45 ports
z GV48 module: provides 48
× 10/100/1000 Mbps PoE-capable auto-sensing RJ-45
ports
z FT48 module: provides 48
× 10/100 Mbps ports
z P4G8 module: provides eight 1000 Mbps SFP/LC optical ports and four 155 Mbps
SFP/LC POS optical ports
z SP4 module: provides four OC-48c SFP/LC POS optical ports
z UP1 module: provides one OC-192c XFP/LC POS optical port
2.2 XP2 Module
2.2.1 Specifications
The XP2 module provides two 10GEBase-R XFP/LC/10GEBase-W XFP/LC optical
ports.
Table 2-1 XP2 module specifications
Attribute XP2
CPU MPC8245
Boot ROM 512 KB
SDRAM 128 MB/256MB
Dimensions (L
× W)
366.7
× 340 mm (14.4 × 13.4 in.)
Max. power consumption 87 W