H3C Technologies H3C S9500 Series Switches - Manual (Page 121)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 6 Switch Monitoring and Maintenance
6-12
6.3.2 Local Loading through Boot Menu
I. Boot menu
After powering on the Switch, run Boot ROM program first and the terminal will display
the following information:
*************************************************
* *
* H3C S9500 Bootrom, Version 206 *
* *
*************************************************
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
CPU type : MPC755
CPU L2 Cache : 1024KB
CPU Clock Speed : 400MHz
BUS Clock Speed : 100MHz
Memory Size : 512MB
Board self testing...........................
The board is steady
SlotNo of this board is 0
The MCX is existent
BootRom main system CRC check is OK
82559 register testing is OK
EPLD1 testing is OK
EPLD2 testing is OK
16c2552 register testing is OK
Please check LEDs......................LED testing finished
The switch's Mac address is 000F-E200-0000
Press Ctrl+B to enter Boot Menu... 5
Password :
Note:
To enter the Boot menu, you must press within five seconds after the
appearance of the prompt “Press Ctrl-B to enter Boot menu...”. Otherwise, the program
decompression process will begin. To access the Boot menu after the Switch enters
the program decompression process, you need to restart the Switch.