H3C Technologies H3C S9500 Series Switches - Manual (Page 56)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-15
2.10.3 Matching Cable
For more details, see section 2.9.3 Matching Cable
2.11 FT48 Module
2.11.1 Specifications
The FT48 module provides 48 x 10/100 Mbps auto-sensing RJ-45 ports.
Table 2-27 FT48 module specifications
Attribute FT48
CPU MPC8245
Boot ROM 512 KB
SDRAM 128 MB/256 MB
Dimensions (L
× W)
366.7
× 340 mm (14.4 × 13.4 in.)
Max. power consumption 55 W
Port 48
Connector RJ-45
Rate
10 Mbps, half/full duplex
100 Mbps, half/full duplex
2.11.2 Panel and LEDs
FT48A
Figure 2-12 FT48 module panel
The FT48 module has one LED for each port on its panel.
Table 2-28 Port LEDs on FT48 module
LED Status
ON A link is present.
OFF No link is present. LINK/ACT
Blinking Packets are being transmitted/received on the port.