H3C Technologies H3C S9500 Series Switches - Manual (Page 167)

Installation Manual
H3C S9500 Series Routing Switches
Appendix B Installation of B68 Cabinet
B-16
The model IV of the H800 series is a fixed height support, which is suitable for the ultra
high and ultra low supports. The suitable lowest floor height of the component is
100mm.
II. Brief Introduction to slide rail
The equipment can move along the slide rail for the convenience of location adjustment.
The slide rail integrates several supports and cabinets together so as to keep the
cabinet level and enhance the connection. The dimensions of the slide rail are shown in
Figure B-16. Each is 600mm long, and two are used for each cabinet.
Figure B-16 Dimensions of slide rail
B.3.2 Installation Flow
The cabinet installation flow on the raised floor is shown in the following diagram.