H3C Technologies H3C S9500 Series Switches - Manual (Page 33)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 1 Product Overview
1-27
The Console port uses an RJ-45 connector. It can be connected to a background
terminal for system debugging, maintenance, management, and host software loading.
Table 1-37 Console port specifications
Attribute Description
Connector RJ-45
Standard Asynchronous EIA/TIA-232
Baud rate 9600 bps (default)
Transmission
distance
≤ 15 m (49 ft)
Service
Connects a serial port of a local PC and runs terminal
emulation on the PC.
Note:
You can choose your own baud rate for the Console port.
z
AUX port
The AUX port uses an RJ-45 connector. The port can serve as a backup port for the
Console port to connect a background terminal, or directly connect a modem device,
for remote system debugging, configuration, maintenance and management.
Table 1-38 AUX port specifications
Attribute Description
Connector RJ-45
Standard Asynchronous EIA/TIA-232
Service
Connects a serial port of a PC (through a Modem pair for a
remote PC) and runs terminal emulation on the PC.
4) RESET button
You can press the RESET button on the panel to reset the SRP1N7 module.
5) Status LEDs
z
CF status LED
You can check operating status of the CF card by reading the CF status LED on the
panel. Fore more details about the LEDs, see Table 1-12
z
Status LEDs for LPU modules