H3C Technologies H3C S9500 Series Switches - Manual (Page 130)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 6 Switch Monitoring and Maintenance
6-21
0. Reboot
Enter your choice(0-7):
Enter your choice(0-7): 6
Please input '0' or '1' ('0':Boot from Flash, '1':Boot from CF card)
BootDev = 0
FlashFileName = 9500.app
6.3.3 Local or Remote Loading through CLI
If your terminal is connected to the switch over a network, you can load Boot ROM and
host program at the remote through CLI.
I. Loading using FTP
Run FTP server on a local PC, provided you have configured username and password
and have set the correct file directory. Suppose IP address of the PC is 10.10.110.1.
Log on to the switch using Telnet or through the Console port to send host program to
the switch using FTP.
Suppose that the main boot file is SWITCH002.app; the active host program is
SWITCH001.app; the Boot ROM program is SWITCHbtm.btm. You can follow these
steps after logging on to the switch.
Step 1: Download the software to the switch using FTP.
ftp 10.10.110.1
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):9500
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get SWITCH002.app SWITCH002.app
[ftp] get Switchbtm.btm Switchbtm.btm
[ftp] bye
Note:
If the switch has two SRPUs, you also can copy the host and Boot ROM program files
to the standby SPPU.