H3C Technologies H3C S9500 Series Switches - Manual (Page 47)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-6
2.5 GP12 Module
2.5.1 Specifications
The GP12 module provides 12
× 1000 Mbps SFP/LC optical ports.
Table 2-9 GP12 module specifications
Attribute GP12
CPU MPC8245
Boot ROM` 512 KB
SDRAM 128 MB/256 MB
Dimensions (L
× W)
366.7
× 340 mm (14.4 × 13.4 in.)
Max. power consumption 55 W
Number of ports 12
Connector SFP/LC
Rate 1000 Mbps
2.5.2 Panel and LEDs
Figure 2-4 GP12 module panel
The GP12 module has two LEDs for each port on its panel.
Table 2-10 Port LEDs on the GP12 module
LED Status
OFF No link is present.
LINK
Green A link is present.
OFF No packets are transmitted/received on the port.
ACT
Orange blinking Packets are being transmitted/received on the port.
2.5.3 Matching Cable
The GP12 module can provide 12
× 1000 Mbps optical ports. You can use these SFP
optical modules: