H3C Technologies H3C S9500 Series Switches - Manual (Page 52)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-11
Table 2-19 100 Mbps port LEDs on F32G module
LED Status
ON A link is present on the port.
OFF No link is present on the port. LINK/ACT
Blinking Packets are being transmitted/received on the port.
2.8.3 Matching Cable
The F32G can provide four 1000 Mbps SFP optical ports. For more details about the
SFP modules, see Table 2-11.
The 32
× 10/100 Mbps electrical ports on the F32G module use RJ-45 connectors and
category-5 twisted pair cables which allow the transmission distance of 100 m (328 ft).
PIN #8
PIN #1
Figure 2-8 RJ-45 connector
Table 2-20 Pin assignment of the RJ-45 MDI connector
10Base-T/100Base-TX
Pin No.
Signal Function
1 Tx+ Transmit data.
2 Tx- Transmit data.
3 Rx+ Receive data.
4 Reserved -
5 Reserved -
6 Rx- Receive data.
7 Reserved -
8 Reserved -