H3C Technologies H3C S9500 Series Switches - Manual (Page 50)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-9
2.7.2 Panel and LEDs
Figure 2-6 FP20 module panel
The FP20 module has two LEDs for each port on its panel.
Table 2-15 Port LEDs on FP20 module
LED Status
OFF No link is present.
LINK
Green A link is present.
OFF No packets are transmitted/received on the port.
ACT
Orange blinking Packets are being transmitted/received on the port.
2.7.3 Matching Cable
The FP20 module provides 20
× 100 Mbps SFP optical ports. You can use these SFP
optical modules:
Table 2-16 Interface modules available for the FP20 module
SFP module
Central
wavelength
Connector Matching cable
Transmission
distance
50/125 µm
multimode
optical fiber
cable
100BASE-FX-
MM-SFP
62.5/125 µm
multimode
optical fiber
cable
2 km (1 mi)
100BASE-FX-
SM-SFP
15 km (9 mi)
100BASE-FX-
SM-LR-SFP
1310 nm
40 km (25 mi)
100BASE-FX-
SM-VR-SFP
1550 nm
LC
9/125 µm single
mode optical
fiber
80 km (50 mi)