H3C Technologies H3C S9500 Series Switches - Manual (Page 145)

Installation Manual
H3C S9500 Series Routing Switches
Appendix A Engineering Labels for Cables
A-11
Table A-3 Information on labels affixed to the fiber between two devices
Content Meaning Example
MN: cabinet number For example, A01
B: frame number
Numbered in top-down order
with two digits, for example, 01
C: physical slot number
Numbered in top-down and
left-right order with two digits,
for example, 01
D: optical interface number
Numbered in top-down and
left-right order with two digits,
for example, 05
MN-B-C-D-R/T
R: optical receiving interface
T: optical transmitting interface
MN: cabinet number
B: frame number
C: physical slot number
D: optical interface number
The meanings are the same as
above. When the local device
and the opposite end device
are not in the same machine
room, MN can be the name of
the machine room.
MN-B-C-D-R/T
R: optical receiving interface
T: optical transmitting interface
II. Example of the label
Figure A-11 shows the label on the optical fiber between two devices:
Figure A-11 Example of the label on the optical fiber between two devices
“A01-01-05-05-R” indicates that the local end of the optical fiber is connected with
Optical Receiving Interface 05 on Slot 5, Frame 01 in the cabinet on Row A, Column 01
in the machine room.
“G01-01-01-01-T” indicates that the opposite end of the optical fiber is connected with
Optical Transmitting Interface 01 on Slot 01, Frame 01 in the cabinet on Row G,
Column 01 in the machine room