H3C Technologies H3C S9500 Series Switches - Manual (Page 46)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-5
2.4.2 Panel and LEDs
Figure 2-3 XK1 module panel
The XK1 module has two port LEDs for the 10GE port on its panel.
Table 2-7 Port LEDs on the XK1 module
LED Status
OFF No link is present.
LINK
Green ON A link is present.
OFF No packets are transmitted/received on the port.
ACT
Orange blinking Packets are being transmitted/received on the port.
2.4.3 Matching Cable
The XK1 module provides one 10GE XENPAK/SC optical or electrical port. You can
use these XENPAK optical modules.
Table 2-8 Interface modules available for the XK1 module
SFP module
Central
wavelength
Conne
ctor
Matching
cable
Transmission
distance
10GBASE-S
R-XENPAK
850 nm
Multimode
optical fiber
cable
26 m (85.3 ft) for the
62.5 µm MMF w/
160MHz*km cable;
82 m (269.0 ft) for the
50 µm MMF w/
500MHz*km cable;
300 m (984.3 ft) for the
50 µm MMF w/
2000MHz*km cable
10GBASE-L
R-XENPAK
1310 nm 10 km (6 mi)
40 km (25 mi)
10GBASE-E
R-XENPAK
1550 nm
SC
Single mode
optical fiber
cable
80 km (50 mi)