H3C Technologies H3C S9500 Series Switches - Manual (Page 36)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 1 Product Overview
1-30
Table 1-41 LPU modules supported on the S9500 series
LPU User interface
XP2 2 × 10GEBase-R XFP/LC/10GEBase-W XFP/LC optical ports
XP4 4 × 10GE XFP/LC optical ports (1:2 convergence)
XK1 1 × 10GE XENPAK/SC port
GP12 12 × 1000 Mbps SFP/LC optical ports
GP24 24 × 1000 Mbps SFP/LC optical ports
FP20 20 × 100 Mbps SFP/LC optical ports
F32G
4 × 1000 Mbps SFP/LC optical ports and 32 × 10/100 Mbps
auto-sensing RJ-45 ports
GT24 24 × 10/100/1000 Mbps auto-sensing RJ-45 electrical ports
GV48
48 × 10/100/1000 Mbps auto-sensing RJ-45 electrical ports
(PoE-supported)
FT48 48 × 10/100 Mbps auto-sensing electrical ports
P4G8
8 × 1000 Mbps SFP/LC optical ports and 4 × 155Mbps SFP/LC
POS optical ports
SP4 4 × OC-48c SFP/LC POS optical ports
UP1 1 × OC-192c XFP/LC POS optical port
1.2.8 Service Processor Cards
The service processor card is designed specially for high-speed processing of a certain
service, which covers partial or no functions of LPU modules.
The S9500 series support these types of service processor cards:
z
NAT service processor card (LSB1NATB0): No external port available.
z
VPLS service processor card (LSB1VPNB0): No external port available.
I. NAT service processor card
1) Technical specifications
The NAT service processor card provides no external port.
Table 1-42 Technical specifications of the NAT service processor card
Attribute NAT
CPU MPC755
Boot ROM 512 KB