H3C Technologies H3C S9500 Series Switches - Manual (Page 137)

Installation Manual
H3C S9500 Series Routing Switches
Appendix A Engineering Labels for Cables
A-3
(1)
(2)
(3)
26.2
12.2
0.6
11
10
100
R1.0
25
1.5
0.6
TO:
(1) Cable tie (2) Label (3) Dividing line on the label
Figure A-2 Label for power cables
A.1.3 Printing Labels
The contents can be printed or written on the labels. Printing is recommended for the
sake of high efficiency and eye-pleasant layout.
I. Template for the printing
The Word-form template is available for label printout. You can get the template from
H3C local office.
When using the template, you can directly modify the contents on the template, and the
following should be observed:
z The settings of centered characters, direction, and fonts should not be changed.
z When there are too many characters to be filled in, zoom out the characters, but
make sure the printouts are clear and legible.
II. Cells merging on the template
To merge the cells, you should first recover the table structure (if gridlines are displayed,
you can start from Step 3 directly).
1) Select the menu item [Edit/Select All].
2) Select the menu item [Format/Borders and Shading/Borders]. Select Box and
click <OK>.
3) Drag the mouse to select the cells to be merged and select the menu item
[Table/Merge Cells].
If two merged cells are still not enough to accommodate the characters, use multiple
lines.