H3C Technologies H3C S9500 Series Switches - Manual (Page 43)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-2
Attribute XP2
Number of ports Two
Connector XFP/LC
Rate 10 Gbps
2.2.2 Panel and LEDs
Figure 2-1 XP2 module panel
The XP2 module has two LEDs for each optical port on its panel.
Table 2-2 1000 Mbps optical port LEDs on the XP2 module
LED Status
OFF No link is present.
LINK
Green A link is present.
OFF No packets are transmitted/received on the port.
ACT
Orange blinking Packets are being transmitted/received on the port.
2.2.3 Matching Cable
The XP2 module provides two 10 Gbps XFP optical ports. To provide optical ports, you
can use these XFP optical modules.