H3C Technologies H3C S9500 Series Switches - Manual (Page 51)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-10
2.8 F32G Module
2.8.1 Specifications
The F32G module provides four 1000 Mbps SFP/LC optical ports and 32 x 10/100
Mbps auto-sensing RJ-45 ports.
Table 2-17 F32G module specifications
Attribute F32G
CPU MPC8245
Boot ROM 512 KB
SDRAM 128 MB/256 MB
Dimensions (L
× W)
366.7
× 340 mm (14.4 × 13.4 in.)
Max. power consumption 55 W
Number of ports
Four 1000 Mbps SFP/LC optical ports
32 x 10/100 Mbps auto-sensing RJ-45 ports
Connector RJ-45, SFP/LC
Rate
10 Mbps, half/full duplex
100 Mbps, half/full duplex
1000 Mbps, full duplex
2.8.2 Panel and LEDs
Figure 2-7 F32G module panel
The F32G module has two LEDs for each 1000 Mbps port on its panel.
Table 2-18 1000 Mbps port LEDs on the F32G module
LED Status
OFF No link is present.
LINK
Green A link is present.
OFF No packets are transmitted/received on the port.
ACT
Orange blinking Packets are being transmitted/received on the port.
The F32G module has one LED for each 100 Mbps port on its panel.