H3C Technologies H3C S9500 Series Switches User Manual
Page 161
Installation Manual
H3C S9500 Series Routing Switches
Appendix B Installation of B68 Cabinet
B-10
(1) Retaining nut of anchor plate
(2) Cabinet M16 foot
(3) Anchor plate of the B68-22 cabinet
Figure B-10
Installation of anchor plate of the B68-22 cabinet
II. Installing insulating parts and fixing anchor plate
First put the insulating washer under the anchor plate and align it with the expansion
bolt hole (one anchor plate needs 2 insulating washers). Then screw the M12
× 70 bolt
into the expansion bolt hole through the anchor plate. Install the accessories (such as
insulating covering and big flat washer) according to Part A in Figure B-11, and then
fasten the bolt force moment to 45 Nm.
This manual is related to the following products:
- H3C S7500E Series Switches H3C S7500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S5500 Series Switches H3C S5120 Series Switches H3C S3610[S5510] Series Switches H3C S3600 Series Switches H3C S3100 Series Switches OAA For Routers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSQM1WCMB0 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA2600 Series WLAN Access Points H3C WA2200 Series WLAN Access Points H3C SecPath F1000-E H3C SecPath F1000-A H3C SecPath F1000-S H3C SecPath F100-A H3C SecPath F100-C-EI H3C SecPath V100-E H3C SecCenter iTAS H3C Device Manager