H3C Technologies H3C S9500 Series Switches - Manual (Page 60)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 2 LPU Modules
2-19
2.13.2 Panel and LEDs
Figure 2-15 SP4 module panel
The SP4 module has two LEDs for each port on its panel.
Table 2-35 POS port LEDs for the SP4 module
LED Status
OFF No link is present.
ALM
Green A link is present.
OFF No packets are transmitted/received on the port.
ACT
Orange blinking Packets are being transmitted/received on the port.
2.13.3 Matching Cable
The SP4 module provides four OC-48c-POS optical ports. To provide optical ports, you
can use these SFP optical modules.
Table 2-36 Optical port modules available for the SP4 module
SFP module
Central
wavelength
Connector
Matching
cable
Transmission
distance
50/125 µm
multimode
optical fiber
cable
2.5GBASE-FX-MM
-SFP
62.5/125 µm
multimode
optical fiber
cable
2 km (1 mi)
2.5GBASE-FX-SM-
SFP
15 km (9 mi)
2.5GBASE-FX-SM-
LR-SFP
1310 nm
40 km (25 mi)
2.5GBASE-FX-SM-
VR-SFP
1550 nm
LC
9/125 µm
single mode
optical fiber
cable
80 km (50 mi)