H3C Technologies H3C S9500 Series Switches - Manual (Page 26)

Installation Manual
H3C S9500 Series Routing Switches
Chapter 1 Product Overview
1-20
Table 1-23 Status LEDs for the SRP1N5 module
SRP1N5 LED Status
ON The switching fabric unit is active.
SFS
OFF The switching fabric unit is standby.
Green The SRP1N5 module is faulty.
OFF The SRP1N5 module is faulty. RUN
Green blinking The SRP1N5 module runs normally.
Red The SRP1N5 module has alarms.
ALM
OFF The SRP1N5 module has no alarms.
Green The SRP1N5 module is active.
ACT
OFF The SRP1N5 module is standby.
III. SRP1N6 module
1) Specifications
The S9505 uses SRP1N6 modules. The following table summarizes the board
specifications.
Table 1-24 SRP1N6 module specifications
Attribute SRP1N6
CPU MPC755
Boot ROM 512 KB
SDRAM 512 MB (expandable to 1 GB)
Dimensions (L × W) 366.7 × 340 mm (14.4 × 13.4 in.)
Port
One Console port, for local configuration management
One AUX port, for remote dialup configuration
management
One 10Base-T/100Base-TX port for system management
and program upgrade
One RS232/485 port, for connecting external PoE power
frame when supported
One hot-swappable CF port
Max. power
consumption
60 W
2) SRP1N6panel