H3C Technologies H3C S9500 Series Switches - Manual (Page 146)

Installation Manual
H3C S9500 Series Routing Switches
Appendix A Engineering Labels for Cables
A-12
A.3.2 Labels for the Fiber that Connects the Device and the ODF
I. Meaning of the label
Table A-4 shows the information on both sides of the labels affixed to the optical fiber
that connects the device and the ODF.
Table A-4 Information on labels affixed to the fiber between the device and the ODF
Content Meaning Example
MN: cabinet number For example, A01
B: frame number
Numbered in bottom-up order
with two digits, for example, 01
C: physical slot number
Numbered in top-down and
left-right order with two digits, for
example, 01.
D: optical interface number
Numbered in top-down and
left-right order with two digits, for
example, 05
MN-B-C-D-R/T
R: optical receiving
interface
T: optical transmitting
interface
MN: row number and
column number of ODF
Numbered in the same rule as
that of the cabinets, for example,
G01 is the ODF of Row G and
Column 01
B: row number of the
terminal device
C: column number of the
terminal device
Range from 01 to 99, for
example, 01-01
ODF-MN-B-C-R/T
R: optical receiving
interface
T: optical transmitting
interface
II. Example of the label
Figure A-12 shows the label on the optical fiber between the device and the ODF.