H3C Technologies H3C S5800 Series Switches Instruction Manuals and User Guides
We have 41 Instruction Manuals and User Guides for H3C S5800 Series Switches H3C Technologies
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 8 |
| Size: | 690 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 42 |
| Size: | 2.41 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- Overview
- SFP modules
- 100-Megabit SFP fiber transceiver module
- 622-Megabit SFP fiber transceiver module
- Gigabit SFP fiber transceiver module
- 2.5-Gigabit SFP fiber transceiver module
- 100-Megabit BIDI fiber transceiver module
- Gigabit BIDI fiber transceiver module
- BIDI GEPON OLT fiber transceiver module
- Gigabit CWDM fiber transceiver module
- Gigabit SFP copper transceiver module
- Gigabit SFP cable
- SFP+ modules
- XFP modules
- CX4 cables
- QSFP+ modules
- CFP modules
- CFP2 modules
- CXP modules
| Recognized languages: | English |
|---|---|
| Pages: | 58 |
| Size: | 751 KB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- IRF configuration
- IRF overview
- Basic concepts
- Establishment, operation, and maintenance of an IRF fabric
- IRF fabric configuration task list
- Pre-configuring an IRF member switch in standalone mode
- Saving configuration to the startup configuration file
- Switching operating mode
- Accessing an IRF fabric
- Configuring IRF member switches in IRF mode
- Specifying an IRF domain ID for an IRF fabric
- Modifying a member ID for a switch
- Specifying a priority for a member switch
- Configuring IRF ports
- Enabling auto reboot for IRF fabric merge
- Configuring a description for a member switch
- Configuring load sharing criteria for IRF links
- Specifying the preservation time of bridge MAC address
- Enabling automatic system software updating
- Setting the IRF link down report delay
- Configuring MAD detection
- IRF configuration fast recovery
- Displaying and maintaining an IRF fabric
- IRF fabric configuration examples
- LACP MAD detection-enabled IRF configuration example (with two member switches)
- BFD MAD detection-enabled IRF configuration example (with two member switches)
- LACP MAD detection-enabled IRF configuration example (with four member switches)
- BFD MAD detection-enabled IRF configuration example (with four member switches)
- Switching the operating mode of IRF member switches from IRF to standalone
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 208 |
| Size: | 2.06 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- ARP configuration
- Gratuitous ARP configuration
- Proxy ARP configuration
- Proxy ARP overview
- Enabling proxy ARP
- Displaying and maintaining proxy ARP
- Proxy ARP configuration examples
- IP addressing configuration
- DHCP overview
- DHCP server configuration
- Introduction to DHCP server
- DHCP server configuration task list
- Configuring an address pool for the DHCP server
- Configuration task list
- Creating a DHCP address pool
- Configuring address allocation mode for a common address pool
- Configuring dynamic address allocation for an extended address pool
- Configuring a domain name suffix for the client
- Configuring DNS servers for the client
- Configuring WINS servers and NetBIOS node type for the client
- Configuring BIMS server information for the client
- Configuring gateways for the client
- Configuring Option 184 parameters for the client with voice service
- Configuring the TFTP server and bootfile name for the client
- Specifying a server’s IP address for the DHCP client
- Configuring self-defined DHCP options
- Enabling DHCP
- Enabling the DHCP server on an interface
- Applying an extended address pool on an interface
- Configuring the DHCP server security functions
- Enabling client offline detection
- Enabling handling of Option 82
- Specifying the threshold for sending trap messages
- Displaying and maintaining the DHCP server
- DHCP server configuration examples
- Troubleshooting DHCP server configuration
- DHCP relay agent configuration
- Introduction to DHCP relay agent
- DHCP relay agent configuration task list
- Enabling DHCP
- Enabling the DHCP relay agent on an interface
- Correlating a DHCP server group with a relay agent interface
- Configuring the DHCP relay agent security functions
- Enabling offline detection
- Configuring the DHCP relay agent to release an IP address
- Configuring the DHCP relay agent to support Option 82
- Displaying and maintaining the DHCP relay agent
- DHCP relay agent configuration examples
- Troubleshooting DHCP relay agent configuration
- DHCP client configuration
- DHCP snooping configuration
- DHCP snooping overview
- DHCP snooping configuration task list
- Configuring DHCP snooping basic functions
- Configuring DHCP snooping to support Option 82
- Configuring DHCP snooping entries backup
- Enabling DHCP starvation attack protection
- Enabling DHCP-REQUEST message attack protection
- Configuring DHCP packet rate limit
- Displaying and maintaining DHCP snooping
- DHCP snooping configuration examples
- IPv4 DNS configuration
- IP performance optimization configuration
- UDP Helper configuration
- IPv6 basics configuration
- IPv6 overview
- IPv6 basics configuration task list
- Configuring basic IPv6 functions
- Configuring IPv6 ND
- Configuring PMTU discovery
- Configuring IPv6 TCP properties
- Configuring ICMPv6 packet sending
- Displaying and maintaining IPv6 basics configuration
- IPv6 basics configuration example
- Troubleshooting IPv6 basics configuration
- DHCPv6 overview
- DHCPv6 relay agent configuration
- DHCPv6 client configuration
- IPv6 DNS configuration
- Tunneling configuration
- Tunneling overview
- Tunneling configuration task list
- Configuring a tunnel interface
- Configuring an IPv6 manual tunnel
- Configuring a 6to4 tunnel
- Configuring an ISATAP tunnel
- Configuring an IPv4 over IPv4 tunnel
- Configuring an IPv4 over IPv6 manual tunnel
- Configuring an IPv6 over IPv6 tunnel
- Displaying and maintaining tunneling configuration
- Troubleshooting tunneling configuration
- GRE configuration
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 251 |
| Size: | 2.42 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- Ethernet interface configuration
- Ethernet interface overview
- Ethernet interface naming conventions
- General configuration
- Configuring basic settings of an Ethernet interface or subinterface
- Configuring an Ethernet interface
- Configuring an Ethernet subinterface
- Shutting down an Ethernet interface or subinterface
- Configuring flow control on an Ethernet interface
- Configuring link change suppression on an Ethernet interface
- Configuring loopback testing on an Ethernet interface
- Configuring the link mode of an Ethernet interface
- Configuring jumbo frame support
- Configuring a Layer 2 Ethernet interface
- Layer 2 Ethernet interface configuration task list
- Configuring a port group
- Setting speed options for auto negotiation on an Ethernet interface
- Configuring storm suppression
- Setting the statistics polling interval
- Enabling loopback detection on an Ethernet interface
- Setting the MDI mode of an Ethernet interface
- Testing the cable connection of an Ethernet interface
- Configuring storm control on an Ethernet interface
- Setting the MTU for a Layer 3 Ethernet interface or subinterface
- Displaying and maintaining an Ethernet interface or subinterface
- Loopback and null interface configuration
- MAC address table configuration
- Overview
- Configuring the MAC address table
- Displaying and maintaining MAC address tables
- MAC address table configuration example
- MAC Information configuration
- Ethernet link aggregation configuration
- Overview
- Ethernet link aggregation configuration task list
- Configuring an aggregation group
- Configuring an aggregate interface
- Configuring the description of an aggregate interface or subinterface
- Configuring the MTU of a Layer 3 aggregate interface or subinterface
- Enabling link state traps for an aggregate interface
- Setting the minimum number of Selected ports for an aggregation group
- Shutting down an aggregate interface
- Restoring the default settings for an aggregate interface
- Configuring load sharing for link aggregation groups
- Enabling link-aggregation traffic redirection
- Displaying and maintaining Ethernet link aggregation
- Ethernet link aggregation configuration examples
- Port isolation configuration
- Spanning tree configuration
- STP
- RSTP
- PVST
- MSTP
- Protocols and standards
- Spanning tree configuration task list
- Configuring the spanning tree
- Setting the spanning tree mode
- Configuring an MST region
- Configuring the root bridge or a secondary root bridge
- Configuring the device priority
- Configuring the maximum hops of an MST region
- Configuring the network diameter of a switched network
- Configuring spanning tree timers
- Configuring the timeout factor
- Configuring the maximum port rate
- Configuring edge ports
- Configuring path costs of ports
- Configuring the port priority
- Configuring the port link type
- Configuring the mode a port uses to recognize/send MSTP packets
- Enabling the output of port state transition information
- Enabling the spanning tree feature
- Performing mCheck
- Configuring Digest Snooping
- Configuring No Agreement Check
- Configuring protection functions
- Displaying and maintaining the spanning tree
- Spanning tree configuration examples
- BPDU tunneling configuration
- VLAN configuration
- Super VLAN configuration
- Isolate-user-VLAN configuration
- Voice VLAN configuration
- GVRP configuration
- QinQ configuration
- Introduction to QinQ
- QinQ configuration task list
- Configuring basic QinQ
- Configuring selective QinQ
- Configuring the TPID value in VLAN tags
- QinQ configuration examples
- VLAN mapping configuration
- LLDP configuration
- Service loopback group configuration
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 397 |
| Size: | 3.51 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- IP routing basics configuration
- Static routing configuration
- Introduction
- Configuring a static route
- Configuring BFD for static routes
- Configuring static route FRR
- Displaying and maintaining static routes
- Static route configuration examples
- RIP configuration
- RIP overview
- RIP configuration task list
- Configuring RIP basic functions
- Configuring RIP route control
- Tuning and optimizing RIP networks
- Configuring RIP timers
- Configuring split horizon and poison reverse
- Configuring the maximum number of load balanced routes
- Enabling zero field check on incoming RIPv1 messages
- Enabling source IP address check on incoming RIP updates
- Configuring RIPv2 message authentication
- Specifying a RIP neighbor
- Configuring RIP-to-MIB binding
- Configuring the RIP packet sending rate
- Configuring RIP FRR
- Configuring BFD for RIP
- Displaying and maintaining RIP
- RIP configuration examples
- Configuring RIP version
- Configuring RIP route redistribution
- Configuring an additional metric for a RIP interface
- Configuring RIP to advertise a summary route
- RIP FRR configuration example
- Configuring BFD for RIP (single-hop detection in BFD echo packet mode)
- Configuring BFD for RIP (bidirectional detection in BFD control packet mode)
- Troubleshooting RIP
- OSPF configuration
- Introduction to OSPF
- OSPF configuration task list
- Enabling OSPF
- Configuring OSPF areas
- Configuring OSPF network types
- Configuring OSPF route control
- Configuration prerequisites
- Configuring OSPF route summarization
- Configuring OSPF inbound route filtering
- Configuring ABR Type-3 LSA filtering
- Configuring an OSPF cost for an interface
- Configuring the maximum number of OSPF routes
- Configuring the maximum number of load-balanced routes
- Configuring OSPF preference
- Configuring OSPF route redistribution
- Advertising a host route
- Tuning and optimizing OSPF networks
- Configuration prerequisites
- Configuring OSPF packet timers
- Specifying LSA transmission delay
- Specifying SPF calculation interval
- Specifying the LSA arrival interval
- Specifying the LSA generation interval
- Disabling interfaces from receiving and sending OSPF packets
- Configuring stub routers
- Configuring OSPF authentication
- Adding the interface MTU into DD packets
- Configuring the maximum number of external LSAs in LSDB
- Enabling compatibility with RFC 1583
- Logging neighbor state changes
- Configuring OSPF network management
- Enabling message logging
- Enabling the advertisement and reception of opaque LSAs
- Configuring OSPF to give priority to receiving and processing hello packets
- Configuring the LSU transmit rate
- Enabling OSPF ISPF
- Configuring OSPF FRR
- Configuring OSPF Graceful Restart
- Configuring OSPF NSR
- Configuring BFD for OSPF
- Displaying and maintaining OSPF
- OSPF configuration examples
- Configuring OSPF basic functions
- Configuring OSPF route redistribution
- Configuring OSPF to advertise a summary route
- Configuring an OSPF stub area
- Configuring an OSPF NSSA area
- Configuring OSPF DR election
- Configuring OSPF virtual links
- Configuring OSPF Graceful Restart
- Configuring OSPF NSR
- Configuring route filtering
- Configuring OSPF FRR
- Configuring BFD for OSPF
- Troubleshooting OSPF configuration
- IS-IS configuration
- IS-IS overview
- IS-IS configuration task list
- Configuring IS-IS basic functions
- Configuring IS-IS routing information control
- Configuration prerequisites
- Configuring IS-IS link cost
- Specifying a priority for IS-IS
- Configuring the maximum number of equal cost routes
- Configuring IS-IS route summarization
- Advertising a default route
- Configuring IS-IS route redistribution
- Configuring IS-IS route filtering
- Configuring IS-IS route leaking
- Tuning and optimizing IS-IS networks
- Configuration prerequisites
- Specifying intervals for sending IS-IS hello and CSNP packets
- Specifying the IS-IS hello multiplier
- Configuring a DIS priority for an interface
- Disabling an interface from sending or receiving IS-IS packets
- Enabling an interface to send small hello packets
- Configuring LSP parameters
- Configuring SPF parameters
- Assigning a high priority to IS-IS routes
- Setting the LSDB overload bit
- Configuring system ID to host name mappings
- Enabling the logging of neighbor state changes
- Enhancing IS-IS network security
- Configuring IS-IS GR
- Configuring IS-IS FRR
- Enabling IS-IS SNMP trap
- Binding an IS-IS process with MIBs
- Configuring BFD for IS-IS
- Displaying and maintaining IS-IS
- IS-IS configuration examples
- BGP configuration
- BGP overview
- BGP configuration task list
- Configuring BGP basic functions
- Controlling route generation
- Controlling route distribution and reception
- Configuration prerequisites
- Configuring BGP route summarization
- Advertising a default route to a peer or peer group
- Configuring BGP route distribution/reception filtering policies
- Enabling BGP and IGP route synchronization
- Limiting prefixes received from a peer or peer group
- Configuring BGP route dampening
- Configuring a shortcut route
- Configuring BGP route attributes
- Configuration prerequisites
- Specifying a preferred value for routes received
- Configuring preferences for BGP routes
- Configure the default local preference
- Configuring the MED attribute
- Configuring the next hop attribute
- Configuring the AS-PATH attribute
- Permit local AS number to appear in routes from a peer or peer group
- Disable BGP from considering AS_PATH during best route selection
- Specify a fake AS number for a peer or peer group
- Configure AS number substitution
- Remove private AS numbers from updates to a peer or peer group
- Ignore the first AS number of eBGP route updates
- Tuning and optimizing BGP networks
- Configuration prerequisites
- Configuring the BGP keepalive interval and holdtime
- Configuring the interval for sending the same update
- Configuring BGP soft-reset
- Enabling the BGP ORF capability
- Enabling 4-byte AS number suppression
- Enabling quick eBGP session reestablishment
- Enabling MD5 authentication for TCP connections
- Configuring BGP load balancing
- Forbiding session establishment with a peer or peer group
- Configuring a large scale BGP network
- Configuring BGP GR
- Enabling trap
- Enabling logging of peer state changes
- Configuring BFD for BGP
- Displaying and maintaining BGP
- BGP configuration examples
- Troubleshooting BGP
- IPv6 static routing configuration
- RIPng configuration
- OSPFv3 configuration
- Introduction to OSPFv3
- OSPFv3 configuration task list
- Enabling OSPFv3
- Configuring OSPFv3 area parameters
- Configuring OSPFv3 network types
- Configuring OSPFv3 routing information control
- Tuning and optimizing OSPFv3 networks
- Configuring OSPFv3 GR
- Configuring BFD for OSPFv3
- Displaying and maintaining OSPFv3
- OSPFv3 configuration examples
- Troubleshooting OSPFv3 configuration
- IPv6 IS-IS configuration
- IPv6 BGP configuration
- IPv6 BGP overview
- IPv6 BGP configuration task list
- Configuring IPv6 BGP basic functions
- Configuration prerequisites
- Specifying an IPv6 BGP peer
- Injecting a local IPv6 route
- Configuring a preferred value for routes from a peer or peer group
- Specifying the source interface for establishing TCP connections
- Allowing the establishment of an indirect eBGP connection
- Configuring a description for an IPv6 peer or peer group
- Disabling session establishment to an IPv6 peer or peer group
- Logging IPv6 peer or peer group state changes
- Controlling route distribution and reception
- Configuration prerequisites
- Configuring IPv6 BGP route redistribution
- Configuring IPv6 BGP route summarization
- Advertising a default route to an IPv6 peer or peer group
- Configuring outbound route filtering
- Configuring inbound route filtering
- Configuring IPv6 BGP and IGP route synchronization
- Configuring route dampening
- Configuring IPv6 BGP route attributes
- Tuning and optimizing IPv6 BGP networks
- Configuring a large-scale IPv6 BGP network
- Configuring BFD for IPv6 BGP
- Displaying and maintaining IPv6 BGP
- IPv6 BGP configuration examples
- Troubleshooting IPv6 BGP configuration
- Routing policy configuration
- Policy-based routing configuration
- Introduction to PBR
- Configuring PBR (using a PBR policy)
- Configuring PBR (using a QoS policy)
- Displaying and maintaining PBR configuration
- PBR configuration examples
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 97 |
| Size: | 998 KB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- ACL configuration
- QoS overview
- QoS configuration approaches
- Priority mapping configuration
- Traffic policing, traffic shaping, and line rate configuration
- Congestion management configuration
- Congestion avoidance configuration
- Traffic filtering configuration
- Priority marking configuration
- Traffic redirecting configuration
- Aggregation CAR configuration
- Class-based accounting configuration
- QPPB configuration
- Appendix
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 467 |
| Size: | 4.50 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- Multicast overview
- IGMP snooping configuration
- IGMP snooping overview
- IGMP snooping configuration task list
- Configuring basic functions of IGMP snooping
- Configuring IGMP snooping port functions
- Configuring IGMP snooping querier
- Configuring IGMP snooping proxying
- Configuring an IGMP snooping policy
- Configuration prerequisites
- Configuring a multicast group filter
- Configuring multicast source port filtering
- Configuring the function of dropping unknown multicast data
- Configuring IGMP report suppression
- Setting the maximum number of multicast groups that a port can join
- Configuring multicast group replacement
- Configuring 802.1p precedence for IGMP messages
- Configuring a multicast user control policy
- Enabling the IGMP snooping host tracking function
- Displaying and maintaining IGMP snooping
- IGMP snooping configuration examples
- Troubleshooting IGMP snooping
- Appendix
- PIM snooping configuration
- Multicast VLAN configuration
- Multicast routing and forwarding configuration
- Multicast routing and forwarding overview
- Configuration task list
- Enabling ip multicast routing
- Configuring multicast routing and forwarding
- Displaying and maintaining multicast routing and forwarding
- Configuration examples
- Troubleshooting multicast routing and forwarding
- IGMP configuration
- IGMP overview
- IGMP configuration task list
- Configuring basic IGMP functions
- Adjusting IGMP performance
- Configuring IGMP SSM mapping
- Configuring IGMP proxying
- Displaying and maintaining IGMP
- IGMP configuration examples
- Troubleshooting IGMP
- PIM configuration
- PIM overview
- Configuring PIM-DM
- Configuring PIM-SM
- Configuring BIDIR-PIM
- Configuring PIM-SSM
- Configuring PIM common features
- Displaying and maintaining PIM
- PIM configuration examples
- Troubleshooting PIM
- MSDP configuration
- MSDP overview
- MSDP configuration task list
- Configuring basic functions of MSDP
- Configuring an MSDP peer connection
- Configuring SA messages related parameters
- Displaying and maintaining MSDP
- MSDP configuration examples
- Troubleshooting MSDP
- MBGP configuration
- MBGP overview
- Protocols and standards
- MBGP configuration task list
- Configuring MBGP basic functions
- Controlling route advertisement and reception
- Prerequisites
- Configuring MBGP route redistribution
- Configure default route redistribution into MBGP
- Configuring MBGP route summarization
- Advertising a default route to an IPv4 MBGP peer or peer group
- Configuring outbound MBGP route filtering
- Configuring inbound MBGP route filtering
- Configuring MBGP route dampening
- Configuring MBGP route attributes
- Tuning and optimizing MBGP networks
- Configuring a large scale MBGP network
- Displaying and maintaining MBGP
- MBGP configuration example
- MLD snooping configuration
- MLD snooping overview
- MLD snooping configuration task list
- Configuring basic functions of MLD snooping
- Configuring MLD snooping port functions
- Configuring MLD snooping querier
- Configuring MLD snooping proxying
- Configuring an MLD snooping policy
- Configuration prerequisites
- Configuring an IPv6 multicast group filter
- Configuring IPv6 multicast source port filtering
- Configuring the function of dropping unknown IPv6 multicast data
- Configuring MLD report suppression
- Setting the maximum number of multicast groups that a port can join
- Configuring IPv6 multicast group replacement
- Configuring 802.1p precedence for MLD messages
- Configuring an IPv6 multicast user control policy
- Enabling the MLD snooping host tracking function
- Displaying and maintaining MLD snooping
- MLD snooping configuration examples
- Troubleshooting MLD snooping
- Appendix
- IPv6 PIM snooping configuration
- IPv6 multicast VLAN configuration
- IPv6 multicast VLAN overview
- IPv6 multicast VLAN configuration task list
- Configuring IPv6 sub-VLAN-based IPv6 multicast VLAN
- Configuring port-based IPv6 multicast VLAN
- Setting the maximum number of forwarding entries for IPv6 multicast VLANs
- Displaying and maintaining IPv6 multicast VLAN
- IPv6 multicast VLAN configuration examples
- IPv6 multicast routing and forwarding configuration
- MLD configuration
- MLD overview
- MLD configuration task list
- Configuring basic functions of MLD
- Adjusting MLD performance
- Configuring MLD SSM mapping
- Configuring MLD proxying
- Displaying and maintaining MLD
- MLD configuration examples
- Troubleshooting MLD
- IPv6 PIM configuration
- IPv6 PIM overview
- Configuring IPv6 PIM-DM
- Configuring IPv6 PIM-SM
- Configuring IPv6 BIDIR-PIM
- Configuring IPv6 PIM-SSM
- Configuring IPv6 PIM common features
- Displaying and maintaining IPv6 PIM
- IPv6 PIM configuration examples
- Troubleshooting IPv6 PIM configuration
- IPv6 MBGP configuration
- IPv6 MBGP overview
- IPv6 MBGP configuration task list
- Configuring IPv6 MBGP basic functions
- Controlling route distribution and reception
- Configuration prerequisites
- Injecting a local IPv6 MBGP route
- Configuring IPv6 MBGP route redistribution
- Configuring IPv6 MBGP route summarization
- Advertising a default route to a peer or peer group
- Configuring outbound IPv6 MBGP route filtering
- Configuring inbound IPv6 MBGP route filtering
- Configuring IPv6 MBGP route dampening
- Configuring IPv6 MBGP route attributes
- Tuning and optimizing IPv6 MBGP networks
- Configuring a large scale IPv6 MBGP network
- Displaying and maintaining IPv6 MBGP
- IPv6 MBGP configuration example
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 206 |
| Size: | 3.75 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- High availability overview
- Active and standby switchover configuration
- Ethernet OAM configuration
- CFD configuration
- DLDP configuration
- DLDP overview
- DLDP configuration task list
- Configuring the duplex mode and speed of an Ethernet interface
- Enabling DLDP
- Setting DLDP mode
- Setting the interval to send advertisement packets
- Setting the delaydown timer
- Setting the port shutdown mode
- Configuring DLDP authentication
- Resetting DLDP state
- Displaying and maintaining DLDP
- DLDP configuration examples
- Troubleshooting DLDP
- RRPP configuration
- RRPP overview
- RRPP configuration task list
- Creating an RRPP domain
- Configuring control VLANs
- Configuring protected VLANs
- Configuring RRPP rings
- Activating an RRPP domain
- Configuring RRPP timers
- Configuring RRPP fast detection
- Configuring an RRPP ring group
- Displaying and maintaining RRPP
- RRPP configuration examples
- Troubleshooting
- Smart Link configuration
- Smart Link overview
- Smart Link configuration task list
- Configuring a Smart Link device
- Configuring an associated device
- Displaying and maintaining Smart Link
- Smart Link configuration examples
- Monitor Link configuration
- VRRP configuration
- VRRP overview
- VRRP standard protocol mode
- Configuring VRRP for IPv4
- VRRP for IPv4 configuration task list
- Specifying the type of MAC addresses mapped to virtual IP addresses
- Creating a VRRP group and configuring virtual IP address
- Configuring router priority, preemptive mode and tracking function
- Configuring VRRP packet attributes
- Enabling the trap function for VRRP
- Displaying and maintaining VRRP for IPv4
- Configuring VRRP for IPv6
- VRRP for IPv6 configuration task list
- Specifying the type of MAC addresses mapped to virtual IPv6 addresses
- Creating a VRRP group and configuring a virtual IPv6 address
- Configuring router priority, preemptive mode and tracking function
- Configuring VRRP packet attributes
- Displaying and maintaining VRRP for IPv6
- IPv4-based VRRP configuration examples
- IPv6-based VRRP configuration examples
- Troubleshooting VRRP
- BFD configuration
- Track configuration
- Track overview
- Track configuration task list
- Associating the track module with a detection module
- Associating the track module with an application module
- Displaying and maintaining track entries
- Track configuration examples
- VRRP-track-NQA collaboration configuration example (the master monitors the uplink)
- Configuring BFD for a VRRP backup to monitor the master
- Configuring BFD for the VRRP master to monitor the uplinks
- Static routing-track-NQA collaboration configuration example
- Static routing-Track-BFD collaboration configuration example
- VRRP-track-interface management collaboration configuration example (the master monitors the uplink interface)
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 20 |
| Size: | 240 KB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- OAP card configuration
- ACFP configuration
- ACSEI configuration
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 191 |
| Size: | 8.13 MB |
Show table of contents
Document Outline
- 00-1Cover.pdf
- 01-Chapter1 Product Overview.pdf
- 02-Chapter2 LPU Modules.pdf
- 03-Chapter3 Installation Preparations.pdf
- 04-Chapter4 Switch Installation.pdf
- Chapter 4 Switch Installation
- 4.1 Confirming Installation Preparation
- 4.2 Installation Flow
- 4.3 Mounting the Switch in User-Supplied Cabinet
- 4.4 Mounting the Switch in B68 Cabinet
- 4.5 Connecting PGND Wire and Power Cord
- 4.6 Installing the AC Power Distribution Box
- 4.7 Installing DC Power Distribution Box
- 4.8 Installing Cabling Rack
- 4.9 Installing Fan Tray
- 4.10 Installing LPU
- 4.11 Connecting Interface Cables
- 4.12 Cable Routing Recommendations
- 4.13 Cable Management
- 4.14 Verifying the Installation
- Chapter 4 Switch Installation
- 05-Chapter5 System Debugging.pdf
- 06-Chapter6 Switch Monitoring and Maintenance.pdf
- Chapter 6 Switch Monitoring and Maintenance
- 6.1 Monitoring the Switch
- 6.2 Hardware Maintenance
- 6.3 Software Upgrade
- 6.4 Password Loss
- Chapter 6 Switch Monitoring and Maintenance
- 07-AppendixA Engineering Labels for Cables.pdf
- Appendix A Engineering Labels for Cables
- A.1 Introduction to Labels
- A.2 Engineering Labels for Ethernet Cables
- A.3 Engineering Labels for Optical Fibers
- A.4 Engineering Labels for Power Cables
- Appendix A Engineering Labels for Cables
- 08-AppendixB Installation of B68 Cabinet.pdf
- Appendix B Installation of B68 Cabinet
- B.1 Installation Overview
- B.2 Cabinet Installation on the Cement Ground
- B.3 Cabinet Installation on Raised Floor
- B.3.1 Introduction to Support and Slide Rail
- B.3.2 Installation Flow
- B.3.3 Support Positioning
- B.3.4 Installation of Support and Slide Rail
- B.3.5 Installing Supporting Accessories of Raised Floor
- B.3.6 Cabinet Leveling
- B.3.7 Cabinet Combination Connection
- B.3.8 Cabinet Fastening
- B.3.9 Insulation Test
- B.3.10 Floor Recovery
- B.4 Quakeproof Reinforcement of Cabinet
- Appendix B Installation of B68 Cabinet
- 09-AppendixC Lightning Protection of the Switch.pdf
| Recognized languages: | English |
|---|---|
| Pages: | 194 |
| Size: | 1.80 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 CLI Configuration
- What Is CLI?
- Entering the CLI
- Command Conventions
- Undo Form of a Command
- CLI View Description
- Using the CLI Online Help
- Typing Commands
- Checking Command Line Errors
- Using Command History
- Controlling CLI Display
- Configuring User Privilege and Command Levels
- Configure user privilege level by using AAA authentication parameters
- Example of configuring a user privilege level by using AAA authentication parameters
- Configure the user privilege level under a user interface
- Example of configuring a user privilege level under a user interface
- Introduction
- Setting the authentication mode for user privilege level switch
- Switching the user privilege level
- Configure user privilege level by using AAA authentication parameters
- Saving the Current Configuration
- Displaying and Maintaining CLI
- 2 Login Methods
- 3 CLI Login
- 4 NMS Login
- 5 User Login Control
- 6 FTP Configuration
- 7 TFTP Configuration
- 8 File System Management
- 9 Configuration File Management
- Configuration File Overview
- Configuration Display
- Saving the Current Configuration
- Setting Configuration Rollback
- Specifying a Startup Configuration File for the Next System Startup
- Backing Up the Startup Configuration File
- Deleting the Startup Configuration File for the Next Startup
- Restoring the Startup Configuration File
- Displaying and Maintaining Device Configuration
- 10 Software Upgrade Configuration
- Device Software Overview
- Software Upgrade Methods
- Upgrading the Boot ROM Program Through a System Reboot
- Upgrading the Boot File Through a System Reboot
- Software Upgrade by Installing Hotfixes
- Patch and patch file
- Incremental patch
- Common patch and temporary patch
- IDLE state
- DEACTIVE state
- ACTIVE state
- RUNNING state
- Step-by-Step Patch Installation Task List
- Configuring the Patch File Location
- Loading a Patch File
- Activating Patches
- Confirming Running Patches
- Step-by-Step Patch Uninstallation Task List
- Stopping Running Patches
- Deleting Patches
- Patch and patch file
- Displaying and Maintaining Software Upgrade
- Software Upgrade Configuration Example
- 11 Device Management
- Device Management Overview
- Device Management Configuration Task List
- Configuring the Device Name
- Configuring the System Clock
- Enabling/Disabling the Display of Copyright Information
- Configuring a Banner
- Configuring the Exception Handling Method
- Rebooting a Device
- Scheduled Task Configuration
- Configuring Temperature Alarm Thresholds for a board
- Clearing the 16-bit Interface Indexes Not Used in the Current System
- Configuring the System Load Sharing Function
- Enabling Active/Standby Mode for Service Ports on SRPUs
- Configuring the Traffic Forwarding Mode of SRPUs
- Configuring the Working Mode of LPUs
- Enabling the Port Down Function Globally
- Enabling Expansion Memory Data Recovery Function on a board
- Identifying and Diagnosing Pluggable Transceivers
- Displaying and Maintaining Device Management Configuration
- 12 Index
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 543 KB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 IRF Configuration
- Introduction to IRF
- Basic Concepts
- Working Process
- IRF Virtual Device Configuration Task List
- Switching Operating Mode
- Configuring an IRF Virtual Device
- Accessing an IRF Virtual Device
- Displaying and Maintaining an IRF Virtual Device
- IRF Virtual Device Configuration Examples
- 2 Index
| Recognized languages: | English |
|---|---|
| Pages: | 205 |
| Size: | 2.15 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 ARP Configuration
- 2 Proxy ARP Configuration
- Proxy ARP Overview
- Enabling Proxy ARP
- Displaying and Maintaining Proxy ARP
- Proxy ARP Configuration Examples
- 3 IP Addressing Configuration
- 4 DHCP Overview
- 5 DHCP Server Configuration
- Introduction to DHCP Server
- DHCP Server Configuration Task List
- Configuring an Address Pool for the DHCP Server
- Configuration Task List
- Creating a DHCP Address Pool
- Configuring an Address Allocation Mode for a Common Address Pool
- Configuring Dynamic Address Allocation for an Extended Address Pool
- Configuring a Domain Name Suffix for the Client
- Configuring DNS Servers for the Client
- Configuring WINS Servers and NetBIOS Node Type for the Client
- Configuring the BIMS Server Information for the Client
- Configuring Gateways for the Client
- Configuring Option 184 Parameters for the Client with Voice Service
- Configuring the TFTP Server and Bootfile Name for the Client
- Configuring Self-Defined DHCP Options
- Enabling DHCP
- Enabling the DHCP Server on an Interface
- Applying an Extended Address Pool on an Interface
- Configuring the DHCP Server Security Functions
- Configuring the Handling Mode for Option 82
- Displaying and Maintaining the DHCP Server
- DHCP Server Configuration Examples
- Troubleshooting DHCP Server Configuration
- 6 DHCP Relay Agent Configuration
- Introduction to DHCP Relay Agent
- DHCP Relay Agent Configuration Task List
- Configuring the DHCP Relay Agent
- Displaying and Maintaining DHCP Relay Agent Configuration
- DHCP Relay Agent Configuration Examples
- Troubleshooting DHCP Relay Agent Configuration
- 7 DHCP Client Configuration
- 8 DHCP Snooping Configuration
- 9 IPv4 DNS Configuration
- 10 IPv6 DNS Configuration
- 11 IP Performance Optimization Configuration
- 12 UDP Helper Configuration
- 13 IPv6 Basics Configuration
- IPv6 Overview
- IPv6 Basics Configuration Task List
- Configuring Basic IPv6 Functions
- Configuring IPv6 NDP
- Configuring PMTU Discovery
- Configuring IPv6 TCP Properties
- Configuring ICMPv6 Packet Sending
- Displaying and Maintaining IPv6 Basics Configuration
- IPv6 Configuration Example
- Troubleshooting IPv6 Basics Configuration
- 14 DHCPv6 Configuration
- 15 Tunneling Configuration
- Tunneling Overview
- Tunneling Configuration Task List
- Configuring a Tunnel Interface
- Configuring an IPv6 Manual Tunnel
- Configuring a 6to4 Tunnel
- Configuring an ISATAP Tunnel
- Configuring an IPv4 over IPv4 Tunnel
- Configuring an IPv4 over IPv6 Tunnel
- Configuring an IPv6 over IPv6 Tunnel
- Configuring a GRE over IPv4 Tunnel
- Configuring a GRE over IPv6 Tunnel
- Displaying and Maintaining Tunneling Configuration
- Troubleshooting Tunneling Configuration
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 337 |
| Size: | 3.21 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 Ethernet Port Configuration
- Ethernet Port Numbering Conventions
- Combo Port Configuration
- Management Ethernet Interface Configuration
- Configuring Basic Settings of an Ethernet Port
- Setting Speed Options for Auto Negotiation on an Ethernet Port
- Configuring Flow Control on an Ethernet Port
- Configuring Link Change Suppression on a Port
- Performing Loopback Testing on an Ethernet Port
- Configuring a Port Group
- Configuring Traffic Storm Protection
- Setting the Statistics Polling Interval
- Enabling Forwarding of Jumbo Frames
- Enabling Loopback Detection on an Ethernet Port
- Configuring the MDI Mode for an Ethernet Port
- Testing the Cable on an Ethernet Port
- Configuring the Connection Mode of an Ethernet Port
- Displaying and Maintaining an Ethernet Port
- 2 EPON Configuration
- 3 OLT Configuration
- OLT Configuration
- OLT Configuration Task List
- EPON System Parameter Configuration
- Configuring Dynamic Bandwidth Allocation and Related Parameters
- Configuring Grant filtering on the OLT port
- Configuring the Link Type of an OLT Port
- Enabling Layer-2 Communication Between the ONUs Attached to an OLT Port
- Configuring Fiber Backup
- Displaying and Maintaining OLT Configuration
- OLT Configuration Examples
- OLT Configuration
- 4 ONU Remote Management Configuration
- ONU Configuration
- ONU Configuration Task List
- Creating an ONU Port
- Binding an ONU with an ONU Port
- Configuring Batch ONU Binding and Automatic ONU Binding
- Configuring the Management VLAN of the ONU
- Configure the ONU Bandwidth Allocation and Related Parameters
- Enabling Related Protocols on an ONU
- Configuring the Multicast Mode of the ONU
- Configuring the Link Type of an ONU Port
- Enabling FEC
- Configuring an ONU to Report Information to the OLT
- Configuring Traffic Encryption
- Testing the Link Between an ONU and the OLT
- Testing the Cable Connected to an UNI Port
- Deregistering an ONU
- Updating ONUs
- Restarting an ONU
- Displaying and Maintaining ONU Port Configuration
- Configuration Examples for ONU Remote Management
- ONU Configuration
- 5 UNI Port Configuration
- 6 Alarm Configuration
- 7 Supported Switch Features and Restrictions
- 8 Loopback Interface and Null Interface Configuration
- 9 MAC Address Table Configuration
- 10 MAC Information Configuration
- 11 Ethernet Link Aggregation Configuration
- Overview
- Ethernet Link Aggregation Configuration Task List
- Configuring an Aggregation Group
- Configuring an Aggregate Interface
- Configuring Load Sharing for Link Aggregation Groups
- Displaying and Maintaining Ethernet Link Aggregation
- Ethernet Link Aggregation Configuration Examples
- 12 Port Isolation Configuration
- 13 MSTP Configuration
- Overview
- Introduction to STP
- Introduction to RSTP
- Introduction to MSTP
- MSTP Configuration Task List
- Configuring MSTP
- Configuring an MST Region
- Configuring the Root Bridge or a Secondary Root Bridge
- Configuring the Work Mode of an MSTP Device
- Configuring the Priority of a Device
- Configuring the Maximum Hops of an MST Region
- Configuring the Network Diameter of a Switched Network
- Configuring Timers of MSTP
- Configuring the Timeout Factor
- Configuring the Maximum Port Rate
- Configuring Ports as Edge Ports
- Configuring Path Costs of Ports
- Configuring Port Priority
- Configuring the Link Type of Ports
- Configuring the Mode a Port Uses to Recognize/Send MSTP Packets
- Enabling the Output of Port State Transition Information
- Enabling the MSTP Feature
- Performing mCheck
- Configuring Digest Snooping
- Configuring No Agreement Check
- Configuring Protection Functions
- Remotely Configuring MSTP for an ONU
- Displaying and Maintaining MSTP
- MSTP Configuration Example
- 14 BPDU Tunneling Configuration
- 15 VLAN Configuration
- Introduction to VLAN
- Configuring Basic VLAN Settings
- Configuring Basic Settings of a VLAN Interface
- Port-Based VLAN Configuration
- MAC-Based VLAN Configuration
- Protocol-Based VLAN Configuration
- IP Subnet-Based VLAN Configuration
- Displaying and Maintaining VLAN
- 16 Super VLAN Configuration
- 17 Isolate-User-VLAN Configuration
- 18 Voice VLAN Configuration
- 19 GVRP Configuration
- 20 QinQ Configuration
- 21 VLAN Mapping Configuration
- 22 LLDP Configuration
- 23 Service Loopback Group Configuration
- 24 Index
| Recognized languages: | English |
|---|---|
| Pages: | 386 |
| Size: | 3.93 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 IP Routing Basics Configuration
- 2 Static Routing Configuration
- 3 RIP Configuration
- RIP Overview
- Configuring RIP Basic Functions
- Configuring RIP Route Control
- Configuring RIP Network Optimization
- Configuring RIP Timers
- Configuring Split Horizon and Poison Reverse
- Configuring the Maximum Number of Load Balanced Routes
- Enabling Zero Field Check on Incoming RIPv1 Messages
- Enabling Source IP Address Check on Incoming RIP Updates
- Configuring RIPv2 Message Authentication
- Specifying a RIP Neighbor
- Configuring RIP-to-MIB Binding
- Configuring the RIP Packet Sending Rate
- Configuring BFD for RIP
- Displaying and Maintaining RIP
- RIP Configuration Examples
- Configuring RIP Version
- Configuring RIP Route Redistribution
- Configuring an Additional Metric for a RIP Interface
- Configuring RIP to Advertise a Summary Route
- Configuring BFD for RIP (Single-Hop Detection in BFD Echo Packet Mode)
- Configuring BFD for RIP (Bidirectional Detection in BFD Control Packet Mode)
- Troubleshooting RIP
- 4 OSPF Configuration
- Introduction to OSPF
- OSPF Configuration Task List
- Enabling OSPF
- Configuring OSPF Areas
- Configuring OSPF Network Types
- Configuring OSPF Route Control
- Prerequisites
- Configuring OSPF Route Summarization
- Configuring OSPF Inbound Route Filtering
- Configuring ABR Type-3 LSA Filtering
- Configuring an OSPF Cost for an Interface
- Configuring the Maximum Number of OSPF Routes
- Configuring the Maximum Number of Load-balanced Routes
- Configuring a Priority for OSPF
- Configuring OSPF Route Redistribution
- Advertising a Host Route
- Configuring OSPF Network Optimization
- Prerequisites
- Configuring OSPF Packet Timers
- Specifying an LSA Transmission Delay
- Specifying SPF Calculation Interval
- Specifying the LSA Minimum Repeat Arrival Interval
- Specifying the LSA Generation Interval
- Disabling Interfaces from Sending OSPF Packets
- Configuring Stub Routers
- Configuring OSPF Authentication
- Adding the Interface MTU into DD Packets
- Configuring the Maximum Number of External LSAs in LSDB
- Making External Route Selection Rules Defined in RFC 1583 Compatible
- Logging Neighbor State Changes
- Configuring OSPF Network Management
- Enabling Message Logging
- Enabling the Advertisement and Reception of Opaque LSAs
- Configuring OSPF to Give Priority to Receiving and Processing Hello Packets
- Configuring the LSU Transmit Rate
- Configuring OSPF Graceful Restart
- Configuring BFD for OSPF
- Displaying and Maintaining OSPF
- OSPF Configuration Examples
- Configuring OSPF Basic Functions
- Configuring OSPF Route Redistribution
- Configuring OSPF to Advertise a Summary Route
- Configuring an OSPF Stub Area
- Configuring an OSPF NSSA Area
- Configuring OSPF DR Election
- Configuring OSPF Virtual Links
- Configuring OSPF Graceful Restart
- Configuring Route Filtering
- Configuring BFD for OSPF
- Troubleshooting OSPF Configuration
- 5 IS-IS Configuration
- IS-IS Overview
- IS-IS Configuration Task List
- Configuring IS-IS Basic Functions
- Configuring IS-IS Routing Information Control
- Configuration Prerequisites
- Configuring IS-IS Link Cost
- Specifying a Priority for IS-IS
- Configuring the Maximum Number of Equal Cost Routes
- Configuring IS-IS Route Summarization
- Advertising a Default Route
- Configuring IS-IS Route Redistribution
- Configuring IS-IS Route Filtering
- Configuring IS-IS Route Leaking
- Tuning and Optimizing IS-IS Networks
- Configuration Prerequisites
- Specifying Intervals for Sending IS-IS Hello and CSNP Packets
- Specifying the IS-IS Hello Multiplier
- Configuring a DIS Priority for an Interface
- Disabling an Interface from Sending/Receiving IS-IS Packets
- Enabling an Interface to Send Small Hello Packets
- Configuring LSP Parameters
- Configuring SPF Parameters
- Setting the LSDB Overload Bit
- Configuring IS-IS Authentication
- Configuring System ID to Host Name Mappings
- Configuring IS-IS GR
- Enabling the Logging of Neighbor State Changes
- Enabling IS-IS SNMP Trap
- Binding an IS-IS Process with MIBs
- Configuring BFD for IS-IS
- Displaying and Maintaining IS-IS
- IS-IS Configuration Example
- 6 BGP Configuration
- BGP Overview
- BGP Configuration Task List
- Configuring BGP Basic Functions
- Controlling Route Generation
- Controlling Route Distribution and Reception
- Prerequisites
- Configuring BGP Route Summarization
- Advertising a Default Route to a Peer or Peer Group
- Configuring BGP Route Distribution/Reception Filtering Policies
- Enabling BGP and IGP Route Synchronization
- Limiting Prefixes Received from a Peer/Peer Group
- Configuring BGP Route Dampening
- Configuring a Shortcut Route
- Configuring BGP Route Attributes
- Tuning and Optimizing BGP Networks
- Prerequisites
- Configuring BGP Keepalive Interval and Holdtime
- Configuring the Interval for Sending the Same Update
- Configuring BGP Soft-Reset
- Enabling the BGP ORF Capability
- Enabling Quick eBGP Session Reestablishment
- Enabling MD5 Authentication for TCP Connections
- Configuring BGP Load Balancing
- Forbiding Session Establishment with a Peer or Peer Group
- Configuring a Large Scale BGP Network
- Configuring BGP GR
- Enabling Trap
- Enabling Logging of Peer State Changes
- Configuring BFD for BGP
- Displaying and Maintaining BGP
- BGP Configuration Examples
- Troubleshooting BGP
- 7 IPv6 Static Routing Configuration
- 8 RIPng Configuration
- 9 OSPFv3 Configuration
- Introduction to OSPFv3
- IPv6 OSPFv3 Configuration Task List
- Enabling OSPFv3
- Configuring OSPFv3 Area Parameters
- Configuring OSPFv3 Network Types
- Configuring OSPFv3 Routing Information Control
- Tuning and Optimizing OSPFv3 Networks
- Configuring OSPFv3 GR
- Displaying and Maintaining OSPFv3
- OSPFv3 Configuration Examples
- Troubleshooting OSPFv3 Configuration
- 10 IPv6 IS-IS Configuration
- 11 IPv6 BGP Configuration
- IPv6 BGP Overview
- Configuration Task List
- Configuring IPv6 BGP Basic Functions
- Prerequisites
- Specifying an IPv6 BGP Peer
- Injecting a Local IPv6 Route
- Configuring a Preferred Value for Routes from a Peer/Peer Group
- Specifying the Source Interface for Establishing TCP Connections
- Allowing the Establishment of a Non-Direct eBGP connection
- Configuring a Description for an IPv6 Peer/Peer Group
- Disabling Session Establishment to an IPv6 Peer/Peer Group
- Logging IPv6 Peer/Peer Group State Changes
- Controlling Route Distribution and Reception
- Configuring IPv6 BGP Route Attributes
- Tuning and Optimizing IPv6 BGP Networks
- Configuring a Large Scale IPv6 BGP Network
- Displaying and Maintaining IPv6 BGP
- IPv6 BGP Configuration Examples
- Troubleshooting IPv6 BGP Configuration
- 12 Route Policy Configuration
- 13 Policy Routing Configuration
- 14 Index
| Recognized languages: | English |
|---|---|
| Pages: | 112 |
| Size: | 1.10 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 ACL Configuration
- 2 QoS Overview
- 3 QoS Configuration Approaches
- 4 Priority Mapping Configuration
- 5 Traffic Policing, Traffic Shaping, and Line Rate Configuration
- 6 Congestion Management Configuration
- 7 Congestion Avoidance
- 8 Traffic Filtering Configuration
- 9 Priority Marking Configuration
- 10 Traffic Redirecting Configuration
- 11 Aggregation CAR Configuration
- 12 Class-Based Accounting Configuration
- 13 QoS in an EPON System
- 14 Appendix A Default Priority Mapping Tables
- 15 Appendix B Introduction to Packet Precedences
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 430 |
| Size: | 4.50 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 Multicast Overview
- 2 IGMP Snooping Configuration
- IGMP Snooping Overview
- IGMP Snooping Configuration Task List
- Configuring Basic Functions of IGMP Snooping
- Configuring IGMP Snooping Port Functions
- Configuring IGMP Snooping Querier
- Configuring IGMP Snooping Proxying
- Configuring an IGMP Snooping Policy
- Configuration Prerequisites
- Configuring a Multicast Group Filter
- Configuring Multicast Source Port Filtering
- Configuring the Function of Dropping Unknown Multicast Data
- Configuring IGMP Report Suppression
- Configuring Maximum Multicast Groups that Can Be Joined on a Port
- Configuring Multicast Group Replacement
- Configuring 802.1p Precedence for IGMP Messages
- Displaying and Maintaining IGMP Snooping
- IGMP Snooping Configuration Examples
- Troubleshooting IGMP Snooping Configuration
- Appendix
- 3 Multicast VLAN Configuration
- 4 Multicast Routing and Forwarding Configuration
- Multicast Routing and Forwarding Overview
- Configuration Task List
- Enabling IP Multicast Routing
- Configuring Multicast Routing and Forwarding
- Displaying and Maintaining Multicast Routing and Forwarding
- Configuration Examples
- Troubleshooting Multicast Routing and Forwarding
- 5 IGMP Configuration
- IGMP Overview
- IGMP Configuration Task List
- Configuring Basic Functions of IGMP
- Adjusting IGMP Performance
- Configuring IGMP SSM Mapping
- Configuring IGMP Proxying
- Displaying and Maintaining IGMP
- IGMP Configuration Examples
- Troubleshooting IGMP
- 6 PIM Configuration
- PIM Overview
- Configuring PIM-DM
- Configuring PIM-SM
- Configuring PIM-SSM
- Configuring PIM Common Features
- Displaying and Maintaining PIM
- PIM Configuration Examples
- Troubleshooting PIM Configuration
- 7 MSDP Configuration
- MSDP Overview
- MSDP Configuration Task List
- Configuring Basic Functions of MSDP
- Configuring an MSDP Peer Connection
- Configuring SA Messages Related Parameters
- Displaying and Maintaining MSDP
- MSDP Configuration Examples
- Troubleshooting MSDP
- 8 MBGP Configuration
- MBGP Overview
- Protocols and Standards
- MBGP Configuration Task List
- Configuring MBGP Basic Functions
- Controlling Route Advertisement and Reception
- Prerequisites
- Configuring MBGP Route Redistribution
- Configure Default Route Redistribution into MBGP
- Configuring MBGP Route Summarization
- Advertising a Default Route to an IPv4 MBGP Peer or Peer Group
- Configuring Outbound MBGP Route Filtering
- Configuring Inbound MBGP Route Filtering
- Configuring MBGP Route Dampening
- Configuring MBGP Route Attributes
- Tuning and Optimizing MBGP Networks
- Configuring a Large Scale MBGP Network
- Displaying and Maintaining MBGP
- MBGP Configuration Example
- 9 MLD Snooping Configuration
- MLD Snooping Overview
- MLD Snooping Configuration Task List
- Configuring Basic Functions of MLD Snooping
- Configuring MLD Snooping Port Functions
- Configuring MLD Snooping Querier
- Configuring MLD Snooping Proxying
- Configuring an MLD Snooping Policy
- Configuration Prerequisites
- Configuring an IPv6 Multicast Group Filter
- Configuring IPv6 Multicast Source Port Filtering
- Configuring Dropping Unknown IPv6 Multicast Data
- Configuring MLD Report Suppression
- Configuring Maximum Multicast Groups that Can Be Joined on a Port
- Configuring IPv6 Multicast Group Replacement
- Configuring 802.1p Precedence for MLD Messages
- Displaying and Maintaining MLD Snooping
- MLD Snooping Configuration Examples
- Troubleshooting MLD Snooping
- Appendix
- 10 IPv6 Multicast VLAN Configuration
- Introduction to IPv6 Multicast VLAN
- IPv6 Multicast VLAN Configuration Task List
- Configuring IPv6 Sub-VLAN-Based IPv6 Multicast VLAN
- Configuring Port-Based IPv6 Multicast VLAN
- Configuring the Maximum Number of Forwarding Entries in IPv6 Multicast VLANs
- Displaying and Maintaining IPv6 Multicast VLAN
- IPv6 Multicast VLAN Configuration Examples
- 11 IPv6 Multicast Routing and Forwarding Configuration
- IPv6 Multicast Routing and Forwarding Overview
- Configuration Task List
- Enabling IPv6 Multicast Routing
- Configuring IPv6 Multicast Routing and Forwarding
- Displaying and Maintaining IPv6 Multicast Routing and Forwarding
- Troubleshooting IPv6 Multicast Policy Configuration
- 12 MLD Configuration
- MLD Overview
- Configuration Task List
- Configuring Basic Functions of MLD
- Adjusting MLD Performance
- Configuring MLD SSM Mapping
- Configuring MLD Proxying
- Displaying and Maintaining MLD Configuration
- MLD Configuration Examples
- Troubleshooting MLD
- 13 IPv6 PIM Configuration
- IPv6 PIM Overview
- Configuring IPv6 PIM-DM
- Configuring IPv6 PIM-SM
- Configuring IPv6 PIM-SSM
- Configuring IPv6 PIM Common Features
- Displaying and Maintaining IPv6 PIM
- IPv6 PIM Configuration Examples
- Troubleshooting IPv6 PIM Configuration
- 14 IPv6 MBGP Configuration
- IPv6 MBGP Overview
- IPv6 MBGP Configuration Task List
- Configuring IPv6 MBGP Basic Functions
- Controlling Route Distribution and Reception
- Configuration Prerequisites
- Injecting a Local IPv6 MBGP Route
- Configuring IPv6 MBGP Route Redistribution
- Configuring IPv6 MBGP Route Summarization
- Advertising a Default Route to a Peer or Peer Group
- Configure Outbound IPv6 MBGP Route Filtering
- Configuring Inbound IPv6 MBGP Route Filtering
- Configuring IPv6 MBGP Route Dampening
- Configuring IPv6 MBGP Route Attributes
- Tuning and Optimizing IPv6 MBGP Networks
- Configuring a Large Scale IPv6 MBGP Network
- Displaying and Maintaining IPv6 MBGP
- IPv6 MBGP Configuration Example
- 15 Index
| Recognized languages: | English |
|---|---|
| Pages: | 211 |
| Size: | 1.85 MB |
Show table of contents
Document Outline
- Title Page.pdf
- Preface.pdf
- Table of Contents
- 1 High Availability Overview
- 2 Active and Standby Switchover Configuration
- 3 Ethernet OAM Configuration
- 4 Extended OAM Configuration
- 5 CFD Configuration
- 6 DLDP Configuration
- Overview
- DLDP Configuration Task List
- Enabling DLDP
- Setting DLDP Mode
- Setting the Interval for Sending Advertisement Packets
- Setting the DelayDown Timer
- Setting the Port Shutdown Mode
- Configuring DLDP Authentication
- Resetting DLDP State
- Displaying and Maintaining DLDP
- DLDP Configuration Examples
- Troubleshooting DLDP
- 7 RRPP Configuration
- RRPP Overview
- RRPP Configuration Task List
- Creating an RRPP Domain
- Configuring Control VLANs
- Configuring Protected VLANs
- Configuring RRPP Rings
- Activating an RRPP Domain
- Configuring RRPP Timers
- Configuring RRPP Fast Detection
- Configuring an RRPP Ring Group
- Displaying and Maintaining RRPP
- RRPP Configuration Examples
- Troubleshooting
- 8 Smart Link Configuration
- Smart Link Overview
- Smart Link Configuration Task List
- Configuring a Smart Link Device
- Configuring an Associated Device
- Displaying and Maintaining Smart Link
- Smart Link Configuration Examples
- 9 Monitor Link Configuration
- 10 VRRP Configuration
- VRRP Overview
- VRRP Standard Protocol Mode
- Configuring VRRP for IPv4
- VRRP for IPv4 Configuration Task List
- Specifying the Type of MAC Addresses Mapped to Virtual IP Addresses
- Creating a VRRP Group and Configuring Virtual IP Address
- Configuring Router Priority, Preemptive Mode and Tracking Function
- Configuring VRRP Packet Attributes
- Enabling the Trap Function for VRRP
- Displaying and Maintaining VRRP for IPv4
- Configuring VRRP for IPv6
- VRRP for IPv6 Configuration Task List
- Specifying the Type of MAC Addresses Mapped to Virtual IPv6 Addresses
- Creating a VRRP Group and Configuring a Virtual IPv6 Address
- Configuring Router Priority, Preemptive Mode and Tracking Function
- Configuring VRRP Packet Attributes
- Displaying and Maintaining VRRP for IPv6
- IPv4-Based VRRP Configuration Examples
- IPv6-Based VRRP Configuration Examples
- Troubleshooting VRRP
- 11 BFD Configuration
- 12 Track Configuration
- Track Overview
- Track Configuration Task List
- Configuring Collaboration Between the Track Module and the Detection Modules
- Configuring Collaboration Between the Track Module and the Application Modules
- Displaying and Maintaining Track Entries
- Track Configuration Examples
- VRRP-Track-NQA Collaboration Configuration Example (The Master Monitors the Uplink)
- Configuring BFD for a VRRP Backup to Monitor the Master
- Configuring BFD for the VRRP Master to Monitor the Uplinks
- Static Routing-Track-NQA Collaboration Configuration Example
- Static Routing-Track-BFD Collaboration Configuration Example
- VRRP-Track-Interface Management Collaboration Configuration Example (The Master Monitors the Uplink Interface)
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 22 |
| Size: | 207 KB |
Show table of contents
Document Outline
- Title Page.pdf
- Preface.pdf
- 12 OAA Configuration Guide.pdf
| Recognized languages: | English |
|---|---|
| Pages: | 269 |
| Size: | 3.16 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 AAA Overview
- 2 AAA Configuration
- AAA Configuration Considerations and Task List
- Configuring AAA Schemes
- Configuring Local Users
- Configuring RADIUS Schemes
- RADIUS scheme configuration task list
- Creating a RADIUS scheme
- Specifying the RADIUS authentication/authorization servers
- Specifying the RADIUS accounting servers and relevant parameters
- Setting the shared keys for RADIUS packets
- Setting the maximum number of RADIUS request transmission attempts
- Setting the supported RADIUS server type
- Setting the status of RADIUS servers
- Configuring attributes for data to be sent to the RADIUS servers
- Specifying the source IP address for RADIUS packets to be sent
- Setting timers for controlling communication with RADIUS servers
- Specifying a security policy server
- Configuring interpretation of RADIUS class attribute as CAR parameters
- Enabling the RADIUS trap function
- Enabling the listening port of the RADIUS client
- Displaying and maintaining RADIUS
- Configuring HWTACACS Schemes
- HWTACACS configuration task list
- Creating an HWTACACS scheme
- Specifying the HWTACACS authentication servers
- Specifying the HWTACACS authorization servers
- Specifying the HWTACACS accounting servers
- Setting the shared keys for HWTACACS packets
- Configuring attributes for data to be sent to the HWTACACS servers
- Specifying the source IP address for HWTACACS packets to be sent
- Setting timers for controlling communication with HWTACACS servers
- Displaying and maintaining HWTACACS
- Configuring AAA Methods for ISP Domains
- Tearing Down User Connections Forcibly
- Configuring a NAS ID-VLAN Binding
- Displaying and Maintaining AAA
- 3 AAA Configuration Examples
- AAA Configuration Examples
- 4 Troubleshooting AAA
- 5 802.1X Configuration
- 802.1X Overview
- 802.1X Configuration
- Configuration Prerequisites
- 802.1X Configuration Task List
- Enabling 802.1X on a Port
- Specifying the Authentication Method of 802.1X Users
- Specifying the Port Authorization Mode
- Specifying the Access Control Method
- Configuring the Maximum Number of Users Accessible to a Port
- Setting the Maximum Number of Attempts for Sending an Authentication Request
- Setting 802.1X Timers
- Configuring the Online User Handshake Function
- Enabling the Proxy Detection Function
- Enabling the Multicast Trigger Function
- Enabling the Unicast Trigger Function
- Specifying a Mandatory Authentication Domain for a Port
- Enabling the Quiet Timer
- Enabling the Re-Authentication Function
- Configuring a Guest VLAN
- Configuring an Auth-Fail VLAN
- Displaying and Maintaining 802.1X
- 802.1X Configuration Examples
- 6 802.1X-Based EAD Fast Deployment Configuration
- 7 MAC Authentication Configuration
- MAC Authentication Overview
- MAC Authentication Timers
- Features Used Together with MAC Authentication
- MAC Authentication Configuration Task List
- Basic Configuration for MAC Authentication
- Specifying a Domain for MAC Authentication Users
- Displaying and Maintaining MAC Authentication
- MAC Authentication Configuration Examples
- 8 Portal Configuration
- Portal Overview
- Portal Configuration Task List
- Basic Portal Configuration
- Configuring a Portal-Free Rule
- Configuring an Authentication Subnet
- Specifying the Source IP Address for Portal Packets to Be Sent
- Logging out Users
- Specifying the Authentication Domain for Portal Users
- Specifying a NAS ID Profile for an Interface
- Setting the Maximum Number of Online Portal Users
- Displaying and Maintaining Portal
- Portal Configuration Examples
- Configuring Direct Portal Authentication
- Configuring Re-DHCP Portal Authentication
- Configuring Layer 3 Portal Authentication
- Configuring Direct Portal Authentication with Extended Functions
- Configuring Re-DHCP Portal Authentication with Extended Functions
- Configuring Layer 3 Portal Authentication with Extended Functions
- Troubleshooting Portal
- 9 Port Security Configuration
- Introduction to Port Security
- Port Security Configuration Task List
- Enabling Port Security
- Setting the Maximum Number of Secure MAC Addresses
- Setting the Port Security Mode
- Configuring Port Security Features
- Configuring Secure MAC Addresses
- Ignoring Authorization Information from the Server
- Displaying and Maintaining Port Security
- Port Security Configuration Examples
- Troubleshooting Port Security
- 10 User Profile Configuration
- 11 Public Key Configuration
- SSH2.0 Configuration
- SSH2.0 Overview
- Configuring the Device as an SSH Server
- Configuring the Device as an SSH Client
- Displaying and Maintaining SSH
- SSH Server Configuration Examples
- SSH Client Configuration Examples
- 12 SFTP Configuration
- 13 IP Source Guard Configuration
- IP Source Guard Overview
- Configuring a Static IP Source Guard Entry
- Configuring the Dynamic IP Source Guard Binding Function
- Displaying and Maintaining IP Source Guard
- IP Source Guard Configuration Examples
- Troubleshooting IP Source Guard
- 14 ARP Attack Protection Configuration
- ARP Attack Protection Overview
- ARP Attack Protection Configuration Task List
- Configuring ARP Defense Against IP Packet Attacks
- Configuring ARP Active Acknowledgement
- Configuring Source MAC Address Based ARP Attack Detection
- Configuring ARP Packet Rate Limit
- Configuring ARP Detection
- Introduction
- Configuring ARP Detection Based on Specified Objects
- Enabling ARP Detection Based on Static IP Source Guard Binding Entries/DHCP Snooping Entries/802.1X Security Entries/OUI MAC Addresses
- Displaying and Maintaining ARP Detection
- ARP Detection Configuration Example I
- ARP Detection Configuration Example II
- 15 URPF Configuration
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 208 |
| Size: | 2.02 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 System Maintaining and Debugging
- 2 NQA Configuration
- NQA Overview
- NQA Configuration Task List
- Configuring the NQA Server
- Enabling the NQA Client
- Creating an NQA Test Group
- Configuring an NQA Test Group
- Configuring the Collaboration Function
- Configuring Trap Delivery
- Configuring the NQA Statistics Function
- Configuring the History Records Saving Function
- Configuring Optional Parameters Common to an NQA Test Group
- Scheduling an NQA Test Group
- Displaying and Maintaining NQA
- NQA Configuration Examples
- ICMP Echo Test Configuration Example
- DHCP Test Configuration Example
- DNS Test Configuration Example
- FTP Test Configuration Example
- HTTP Test Configuration Example
- UDP Jitter Test Configuration Example
- SNMP Test Configuration Example
- TCP Test Configuration Example
- UDP Echo Test Configuration Example
- Voice Test Configuration Example
- DLSw Test Configuration Example
- NQA Collaboration Configuration Example
- 3 NTP Configuration
- NTP Overview
- NTP Configuration Task List
- Configuring the Operation Modes of NTP
- Configuring the Local Clock as a Reference Source
- Configuring Optional Parameters of NTP
- Configuring Access-Control Rights
- Configuring NTP Authentication
- Displaying and Maintaining NTP
- NTP Configuration Examples
- Configuring NTP Client/Server Mode
- Configuring the NTP Symmetric Mode
- Configuring NTP Broadcast Mode
- Configuring NTP Multicast Mode
- Configuring NTP Client/Server Mode with Authentication
- Configuring NTP Broadcast Mode with Authentication
- Configuring MPLS VPN Time Synchronization in Client/server Mode
- Configuring MPLS VPN Time Synchronization in Symmetric Peers Mode
- 4 IPC Configuration
- 5 PoE Configuration
- PoE Overview
- PoE Configuration Task List
- Enabling PoE
- Detecting PDs
- Configuring the PoE Power
- Configuring PoE Power Management
- Configuring the PoE Monitoring Function
- Configuring PoE Interface through PoE Profile
- Upgrading PSE Processing Software in Service
- Displaying and Maintaining PoE
- PoE Configuration Example
- Troubleshooting PoE
- 6 SNMP Configuration
- 7 MIB Style Configuration
- 8 RMON Configuration
- 9 Port Mirroring Configuration
- Introduction to Port Mirroring
- Configuring Local Port Mirroring
- Configuring Layer 2 Remote Port Mirroring
- Configuring Layer 3 Remote Port Mirroring
- Configuring Local Port Mirroring for an ONU
- Displaying and Maintaining Port Mirroring
- Port Mirroring Configuration Examples
- 10 Traffic Mirroring Configuration
- 11 sFlow Configuration
- 12 Information Center Configuration
- Information Center Overview
- Configuring Information Center
- Information Center Configuration Task List
- Outputting System Information to the Console
- Outputting System Information to a Monitor Terminal
- Outputting System Information to a Log Host
- Outputting System Information to the Trap Buffer
- Outputting System Information to the Log Buffer
- Outputting System Information to the SNMP Module
- Saving System Information to a Log File
- Configuring Synchronous Information Output
- Disabling a Port from Generating Link Up/Down Logging Information
- Displaying and Maintaining Information Center
- Information Center Configuration Examples
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 526 |
| Size: | 3.23 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- Configuring basic MPLS
- Configuring a static LSP
- Configuring LDP
- Overview
- LDP configuration task list
- Enabling LDP
- Configuring Hello parameters
- Configuring LDP session parameters
- Configuring LDP backoff
- Configuring LDP MD5 authentication
- Configuring an LSP generation policy
- Configuring the LDP label distribution control mode
- Configuring a label advertisement policy
- Configuring a label acceptance policy
- Configuring LDP loop detection
- Configuring LDP session protection
- Configuring LDP GR
- Configuring LDP NSR
- Configuring LDP-IGP synchronization
- Configuring LDP FRR
- Resetting LDP sessions
- Enabling SNMP notifications for LDP
- Displaying and maintaining LDP
- LDP configuration examples
- Configuring MPLS TE
- Overview
- MPLS TE configuration task list
- Enabling MPLS TE
- Configuring a tunnel interface
- Configuring DS-TE
- Configuring an MPLS TE tunnel to use a static CRLSP
- Configuring an MPLS TE tunnel to use a dynamic CRLSP
- Configuring traffic forwarding
- Configuring a bidirectional MPLS TE tunnel
- Configuring CRLSP backup
- Configuring MPLS TE FRR
- Displaying and maintaining MPLS TE
- MPLS TE configuration examples
- Establishing an MPLS TE tunnel over a static CRLSP
- Establishing an MPLS TE tunnel with RSVP-TE
- Establishing an inter-AS MPLS TE tunnel with RSVP-TE
- Bidirectional MPLS TE tunnel configuration example
- CRLSP backup configuration example
- Manual bypass tunnel for FRR configuration example
- Auto FRR configuration example
- IETF DS-TE configuration example
- Troubleshooting MPLS TE
- Configuring a static CRLSP
- Configuring RSVP
- Overview
- RSVP configuration task list
- Enabling RSVP
- Configuring RSVP refresh
- Configuring RSVP Srefresh and reliable RSVP message delivery
- Configuring RSVP hello extension
- Configuring RSVP authentication
- Specifying a DSCP value for outgoing RSVP packets
- Configuring RSVP GR
- Enabling BFD for RSVP
- Displaying and maintaining RSVP
- RSVP configuration examples
- Configuring tunnel policies
- Configuring MPLS L3VPN
- Overview
- MPLS L3VPN configuration task list
- Configuring basic MPLS L3VPN
- Configuring inter-AS VPN
- Configuring nested VPN
- Configuring HoVPN
- Configuring an OSPF sham link
- Specifying the VPN label processing mode on the egress PE
- Configuring BGP AS number substitution
- Configuring MPLS L3VPN FRR
- Enabling SNMP notifications for MPLS L3VPN
- Displaying and maintaining MPLS L3VPN
- MPLS L3VPN configuration examples
- Configuring basic MPLS L3VPN
- Configuring a hub-spoke network
- Configuring MPLS L3VPN inter-AS option A
- Configuring MPLS L3VPN inter-AS option B
- Configuring MPLS L3VPN inter-AS option C
- Configuring MPLS L3VPN carrier's carrier
- Configuring nested VPN
- Configuring HoVPN
- Configuring an OSPF sham link
- Configuring BGP AS number substitution
- Configuring MPLS L3VPN FRR through VPNv4 route backup for a VPNv4 route
- Configuring MPLS L3VPN FRR through VPNv4 route backup for an IPv4 route
- Configuring MPLS L3VPN FRR through IPv4 route backup for a VPNv4 route
- Configuring IPv6 MPLS L3VPN
- Overview
- IPv6 MPLS L3VPN configuration task list
- Configuring basic IPv6 MPLS L3VPN
- Configuring inter-AS IPv6 VPN
- Configuring an OSPFv3 sham link
- Displaying and maintaining IPv6 MPLS L3VPN
- IPv6 MPLS L3VPN configuration examples
- Configuring MPLS L2VPN
- Overview
- MPLS L2VPN configuration task list
- Enabling L2VPN
- Configuring an AC
- Configuring a cross-connect
- Configuring a PW
- Binding an AC to a cross-connect
- Configuring PW redundancy
- Enabling MAC address software learning on an interface
- Displaying and maintaining MPLS L2VPN
- MPLS L2VPN configuration examples
- Configuring VPLS
- Overview
- VPLS configuration task list
- Enabling L2VPN
- Configuring an AC
- Configuring a VSI
- Configuring a PW
- Binding an AC to a VSI
- Configuring UPE dual homing
- Configuring MAC address learning
- Displaying and maintaining VPLS
- VPLS configuration examples
- Configuring MPLS OAM
- Configuring MCE
- Configuring IPv6 MCE
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 14 |
| Size: | 558 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 26 |
| Size: | 766 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 10 |
| Size: | 551 KB |
Show table of contents
| Recognized languages: | English |
|---|---|
| Pages: | 11 |
| Size: | 161 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 14 |
| Size: | 1.26 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 19 |
| Size: | 431 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 27 |
| Size: | 496 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 18 |
| Size: | 429 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 3 |
| Size: | 68 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 17 |
| Size: | 374 KB |
Show table of contents
| Recognized languages: | English |
|---|---|
| Pages: | 16 |
| Size: | 553 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 13 |
| Size: | 488 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 103 |
| Size: | 7.02 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Content
- Product overview
- About the H3C S5800 Switch Series
- Switch models and technical specifications
- Hardware compatibility matrix
- S5800-60C-PWR panel views
- S5800-56C panel views
- S5800-56C-PWR panel views
- S5800-54S panel views
- S5800-32C panel views
- S5800-32C-PWR panel views
- S5800-32F panel views
- Ports
- LEDs
- Hot swappable power modules
- Hot swappable fan trays
- Interface cards
- OAP cards
- Hot swappable PoE modules
- Preparing for installation
- Installing the switch
- Installing the switch in a 19-inch rack
- Installation methods
- Mounting bracket and cable management bracket kits
- Rack mounting rail kit
- Installing the mounting brackets, chassis rails, and grounding cable (for the S5800-54S)
- Attaching the mounting brackets to the switch chassis (for all S5800 switches except the S5800-54S)
- Rack-mounting the S5800-54S switch
- Rack-mounting an S5800 switch except the S5800-54S
- Mounting the switch on a workbench
- Grounding the switch
- Installing/Removing a fan tray
- Installing/Removing a power module
- Connecting the power cord
- Connecting an AC power cord to the switch
- Connecting the switch to a –54 VDC output RPS
- Connecting the switch to a 12 VDC output RPS
- Connecting the PSR150-A/PSR150-A1
- Connecting the PSR150-D/PSR150-D1 to a –48 VDC power source
- Connecting the PSR150-D/PSR150-D1 to a –54 VDC output RPS
- Connecting the PSR300-12A/PSR300-12A1/PSR300-12A2
- Connecting the PSR300-12D1/PSR300-12D2 to a –48 VDC power source
- Connecting the PSR300-12D1/PSR300-12D2 to a –54 VDC output RPS
- Connecting the PSR750-A
- Connecting the PSR750-D to a –54 VDC output RPS
- Connecting the LSVM1AC650/LSVM1AC300
- Connecting the LSVM1DC650/LSVM1DC300
- Installing/Removing an interface card
- Installing/Removing an OAP card
- Installing an OAP card in the OAP card slot (only for the S5800-60C-PWR)
- Removing the card in the OAP card slot (only for the S5800-60C-PWR)
- Installing an OAP card in an expansion interface card slot (for the entire series but the S5800-54S)
- Removing the OAP card in an expansion interface card slot (for the entire series but the S5800-54S)
- Installing/Removing a PoE module
- Verifying the installation
- Installing the switch in a 19-inch rack
- Powering on the switch for the first time
- Setting up an IRF fabric
- IRF fabric setup flowchart
- Planning IRF fabric setup
- Configuring basic IRF settings
- Connecting the physical IRF ports
- Accessing the IRF fabric to verify the configuration
- Maintenance and troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 239 |
| Size: | 3.11 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- Configuring SNMP
- Configuring MIB style
- Configuring RMON
- Configuring NTP
- Overview
- NTP configuration task list
- Configuring NTP operation modes
- Configuring the local clock as a reference source
- Configuring optional parameters for NTP
- Configuring access-control rights
- Configuring NTP authentication
- Displaying and maintaining NTP
- NTP configuration examples
- NTP client/server mode configuration example
- NTP symmetric peers mode configuration example
- NTP broadcast mode configuration example
- NTP multicast mode configuration example
- Configuration example for NTP client/server mode with authentication
- Configuration example for NTP broadcast mode with authentication
- Configuration example for MPLS VPN time synchronization in client/server mode
- Configuration example for MPLS VPN time synchronization in symmetric peers mode
- Configuring cluster management
- Overview
- Cluster management configuration task list
- Configuring the management device
- Enabling NDP globally and for specific ports
- Configuring NDP parameters
- Enabling NTDP globally and for specific ports
- Configuring NTDP parameters
- Manually collecting topology information
- Enabling the cluster function
- Establishing a cluster
- Enabling management VLAN autonegotiation
- Configuring communication between the management device and the member devices within a cluster
- Configuring cluster management protocol packets
- Cluster member management
- Configuring the member devices
- Toggling between the CLIs of the management device and a member device
- Adding a candidate device to a cluster
- Configuring advanced cluster functions
- Displaying and maintaining cluster management
- Cluster management configuration example
- Configuring CWMP (TR-069)
- Overview
- CWMP configuration approaches
- Enabling CWMP
- Configuring ACS attributes
- Configuring CPE attributes
- Configuring the CPE username and password
- Configuring the CWMP connection interface
- Sending Inform messages
- Configuring the maximum number of attempts made to retry a connection
- Configuring the close-wait timer of the CPE
- Configuring the CPE working mode
- Specifying an SSL client policy for HTTPS connection to ACS
- Displaying and maintaining CWMP
- Configuring IP accounting
- Configuring NetStream
- Overview
- NetStream basic concepts
- NetStream key technologies
- NetStream sampling and filtering
- NetStream configuration task list
- Enabling NetStream on an interface
- Configuring NetStream filtering and sampling
- Configuring NetStream data export
- Configuring attributes of NetStream export data
- Configuring NetStream flow aging
- Displaying and maintaining NetStream
- NetStream configuration examples
- Configuring NQA
- Overview
- NQA configuration task list
- Configuring the NQA server
- Configuring the NQA client
- Enabling the NQA client
- Configuring an ICMP echo operation
- Configuring a DHCP operation
- Configuring a DNS operation
- Configuring an FTP operation
- Configuring an HTTP operation
- Configuring a UDP jitter operation
- Configuring an SNMP operation
- Configuring a TCP operation
- Configuring a UDP echo operation
- Configuring a voice operation
- Configuring a DLSw operation
- Configuring optional parameters for an NQA operation
- Configuring the collaboration function
- Configuring threshold monitoring
- Configuring the NQA statistics function
- Configuring NQA history records saving function
- Scheduling an NQA operation
- Displaying and maintaining NQA
- NQA configuration examples
- ICMP echo operation configuration example
- DHCP operation configuration example
- DNS operation configuration example
- FTP operation configuration example
- HTTP operation configuration example
- UDP jitter operation configuration example
- SNMP operation configuration example
- TCP operation configuration example
- UDP echo operation configuration example
- Voice operation configuration example
- DLSw operation configuration example
- NQA collaboration configuration example
- Configuring IP traffic ordering
- Configuring sFlow
- Configuring samplers
- Configuring PoE
- Hardware compatibility
- Overview
- PoE configuration task list
- Enabling PoE
- Detecting PDs
- Configuring the PoE power
- Configuring PoE power management
- Configuring the PoE monitoring function
- Configuring a PoE interface by using a PoE profile
- Upgrading PSE processing software in service
- Displaying and maintaining PoE
- PoE configuration example
- Troubleshooting PoE
- Configuring port mirroring
- Overview
- Configuring local port mirroring
- Configuring remote port mirroring
- Displaying and maintaining port mirroring
- Local port mirroring configuration example
- Configuring traffic mirroring
- Configuring the information center
- Overview
- FIPS compliance
- Information center configuration task list
- Outputting system information to the console
- Outputting system information to the monitor terminal
- Outputting system information to a log host
- Outputting system information to the trap buffer
- Outputting system information to the log buffer
- Outputting system information to the SNMP module
- Outputting system information to the Web interface
- Saving system information to a log file
- Managing security logs
- Enabling synchronous information output
- Disabling an interface from generating link up/down logging information
- Displaying and maintaining information center
- Information center configuration examples
- Using ping, tracert, and system debugging
- Configuring IPv6 NetStream
- Overview
- IPv6 NetStream basic concepts
- IPv6 NetStream key technologies
- IPv6 NetStream configuration task list
- Enabling IPv6 NetStream
- Configuring IPv6 NetStream data export
- Configuring attributes of IPv6 NetStream data export
- Configuring IPv6 NetStream flow aging
- Displaying and maintaining IPv6 NetStream
- IPv6 NetStream configuration examples
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 111 |
| Size: | 1.11 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- Multicast overview
- IGMP snooping configuration
- IGMP snooping overview
- IGMP snooping configuration task list
- Configuring basic functions of IGMP snooping
- Configuring IGMP snooping port functions
- Configuring IGMP snooping querier
- Configuring IGMP snooping proxying
- Configuring an IGMP snooping policy
- Configuration prerequisites
- Configuring a multicast group filter
- Configuring multicast source port filtering
- Configuring the function of dropping unknown multicast data
- Configuring IGMP report suppression
- Configuring maximum multicast groups that a port can join
- Configuring multicast group replacement
- Configuring 802.1p precedence for IGMP messages
- Configuring a multicast user control policy
- Displaying and maintaining IGMP snooping
- IGMP snooping configuration examples
- Troubleshooting IGMP snooping configuration
- Multicast VLAN configuration
- MLD snooping configuration(available only on the S3100V2-EI)
- MLD snooping overview
- MLD snooping configuration task list
- Configuring basic functions of MLD snooping
- Configuring MLD snooping port functions
- Configuring MLD snooping querier
- Configuring MLD snooping proxying
- Configuring an MLD snooping policy
- Configuration prerequisites
- Configuring an IPv6 multicast group filter
- Configuring dropping unknown IPv6 multicast data
- Configuring MLD report suppression
- Configuring maximum multicast groups that a port can join
- Configuring IPv6 multicast group replacement
- Configuring 802.1p precedence for MLD messages
- Configuring an IPv6 multicast user control policy
- Displaying and maintaining MLD snooping
- MLD snooping configuration examples
- Troubleshooting MLD snooping
- IPv6 multicast VLAN configuration(available only on the S3100V2-EI)
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 394 |
| Size: | 4.82 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- Configuring AAA
- AAA overview
- AAA configuration considerations and task list
- Configuring AAA schemes
- Configuring local users
- Configuring RADIUS schemes
- RADIUS scheme configuration task list
- Creating a RADIUS scheme
- Specifying the RADIUS authentication/authorization servers
- Specifying the RADIUS accounting servers and the relevant parameters
- Specifying the shared keys for authenticating RADIUS packets
- Setting the supported RADIUS server type
- Setting the maximum number of RADIUS request transmission attempts
- Setting the status of RADIUS servers
- Setting the username format and traffic statistics units
- Specifying the source IP address for outgoing RADIUS packets
- Specifying a backup source IP address for outgoing RADIUS packets
- Setting timers for controlling communication with RADIUS servers
- Configuring RADIUS accounting-on
- Configuring the IP address of the security policy server
- Enabling the RADIUS offload feature
- Configuring interpretation of RADIUS class attribute as CAR parameters
- Enabling the trap function for RADIUS
- Enabling logging of RADIUS packets
- Enabling the RADIUS listening port of the RADIUS client
- Displaying and maintaining RADIUS
- Configuring HWTACACS schemes
- HWTACACS configuration task list
- Creating an HWTACACS scheme
- Specifying the HWTACACS authentication servers
- Specifying the HWTACACS authorization servers
- Specifying the HWTACACS accounting servers and the relevant parameters
- Specifying the shared keys for authenticating HWTACACS packets
- Setting the username format and traffic statistics units
- Specifying a source IP address for outgoing HWTACACS packets
- Setting timers for controlling communication with HWTACACS servers
- Displaying and maintaining HWTACACS
- Configuring LDAP schemes
- LDAP configuration task list
- Creating an LDAP scheme
- Specifying the LDAP authentication server
- Specifying the LDAP authorization server
- Specifying the LDAP version
- Specifying the LDAP server type
- Setting the LDAP server timeout period
- Configuring administrator attributes
- Configuring LDAP user attributes
- Configuring LDAP group attributes
- Displaying and maintaining LDAP
- Configuring AAA methods for ISP domains
- Tearing down user connections forcibly
- Configuring local EAP authentication
- Configuring a NAS ID-VLAN binding
- Specifying the device ID used in stateful failover mode
- Displaying and maintaining AAA
- AAA configuration examples
- HWTACACS authentication and authorization for Telnet users
- Local authentication and HWTACACS authorization for Telnet users
- RADIUS authentication, authorization, and accounting for wireless users
- Authentication for Telnet users by an LDAP server
- AAA for portal users by a RADIUS server
- AAA for 802.1X users by a RADIUS server
- Local EAP authentication and authorization for 802.1X users
- RADIUS offload for 802.1X users
- Level switching authentication for Telnet users by an HWTACACS server
- Local EAP authentication for 802.1X users by an LDAP server
- Control of Temporary Access of Wireless Users
- Troubleshooting AAA
- 802.1X overview
- Configuring 802.1X
- H3C implementation of 802.1X
- Configuration prerequisites
- 802.1X configuration task list
- Enabling EAP relay or EAP termination
- Setting the maximum number of concurrent 802.1X users on a port
- Setting the maximum number of authentication request attempts
- Setting the 802.1X authentication timeout timers
- Configuring the online user handshake function
- Configuring the authentication trigger function
- Specifying a mandatory authentication domain on a port
- Configuring the quiet timer
- Enabling the periodic online user re-authentication function
- Configuring an 802.1X guest VLAN
- Configuring an Auth-Fail VLAN
- Specifying supported domain name delimiters
- Configuring the accounting delay feature
- Displaying and maintaining 802.1X
- 802.1X authentication configuration example
- 802.1X with ACL assignment configuration example
- Configuring MAC authentication
- Overview
- Using MAC authentication with other features
- MAC authentication configuration task list
- Basic configuration for MAC authentication
- Specifying an authentication domain for MAC authentication users
- Configuring a MAC authentication guest VLAN
- Displaying and maintaining MAC authentication
- MAC authentication configuration examples
- Configuring portal authentication
- Overview
- Portal configuration task list
- Configuration prerequisites
- Specifying a portal server for Layer 3 portal authentication
- Configuring the local portal server
- Enabling Layer 3 portal authentication
- Controlling access of portal users
- Configuring RADIUS related attributes
- Specifying a source IP address for outgoing portal packets
- Configuring MAC-based quick portal authentication
- Assiociating an SSID and AP with a portal server and authentication domain
- Configuring portal stateful failover
- Specifying an auto redirection URL for authenticated portal users
- Configuring portal detection functions
- Logging off portal users
- Enabling logging for portal packets
- Configuring to carry parameters in the redirection URL
- Displaying and maintaining portal
- Portal configuration examples
- Configuring direct portal authentication
- Configuring re-DHCP portal authentication
- Configuring direct portal authentication with extended functions
- Configuring re-DHCP portal authentication with extended functions
- Configuring portal stateful failover
- Configuring portal server detection and portal user information synchronization
- Configuring direct portal authentication using local portal server
- Configuring portal stateful failover with local portal servers
- Troubleshooting portal
- Configuring port security
- Overview
- Port security configuration task list
- Enabling port security
- Setting port security's limit on the number of MAC addresses on a port
- Setting the port security mode
- Configuring port security features
- Configuring port security for WLAN ports
- Ignoring authorization information from the server
- Enabling remote authentication proxy
- Displaying and maintaining port security
- Port security configuration examples
- Troubleshooting port security
- Configuring a user profile
- Configuring password control
- Managing public keys
- Configuring PKI
- Overview
- PKI configuration task list
- Configuring an entity DN
- Configuring a PKI domain
- Submitting a PKI certificate request
- Retrieving a certificate manually
- Configuring PKI certificate verification
- Destroying a local RSA key pair
- Deleting a certificate
- Configuring an access control policy
- Displaying and maintaining PKI
- PKI configuration examples
- Troubleshooting PKI
- Configuring SSH2.0
- Overview
- Configuring the access controller as an SSH server
- Configuring the access controller as an SSH client
- Displaying and maintaining SSH
- SSH server configuration examples
- SSH client configuration examples
- Configuring SFTP
- Configuring SSL
- Configuring TCP attack protection
- Configuring ARP attack protection
- Overview
- ARP attack protection configuration task list
- Configuring unresolvable IP attack protection
- Configuring ARP packet rate limit
- Configuring source MAC address based ARP attack detection
- Configuring ARP packet source MAC address consistency check
- Configuring ARP active acknowledgement
- Configuring ARP detection
- Configuring ARP gateway protection
- Configuring ARP filtering
- Configuring FIPS
- Configuring IPsec
- Overview
- IPsec configuration task list
- Configuring an IPsec proposal
- Configuring an IPsec policy
- Applying an IPsec policy group to an interface
- Configuring IPsec stateful failover
- Displaying and maintaining IPsec
- Configuration example for IPsec between AC and AP
- IPsec stateful failover configuration example
- Configuring IKE
- Overview
- IKE configuration task list
- Configuring a name for the local security gateway
- Configuring an IKE proposal
- Configuring an IKE peer
- Setting keepalive timers
- Setting the NAT keepalive timer
- Configuring a DPD detector
- Disabling next payload field checking
- Displaying and maintaining IKE
- IKE configuration example
- Troubleshooting IKE
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 397 |
| Size: | 4.10 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- Configuring basic MPLS
- Configuring a static LSP
- Configuring LDP
- Overview
- LDP configuration task list
- Enabling LDP
- Configuring Hello parameters
- Configuring LDP session parameters
- Configuring LDP backoff
- Configuring LDP MD5 authentication
- Configuring an LSP generation policy
- Configuring the LDP label distribution control mode
- Configuring a label advertisement policy
- Configuring a label acceptance policy
- Configuring LDP loop detection
- Configuring LDP session protection
- Configuring LDP GR
- Resetting LDP sessions
- Enabling SNMP notifications for LDP
- Displaying and maintaining LDP
- LDP configuration examples
- Configuring MPLS TE
- Overview
- MPLS TE configuration task list
- Enabling MPLS TE
- Configuring a tunnel interface
- Configuring an MPLS TE tunnel to use a static CRLSP
- Configuring an MPLS TE tunnel to use a dynamic CRLSP
- Configuring traffic forwarding
- Configuring a bidirectional MPLS TE tunnel
- Configuring CRLSP backup
- Displaying and maintaining MPLS TE
- MPLS TE configuration examples
- Configuring a static CRLSP
- Configuring RSVP
- Configuring tunnel policies
- Configuring MPLS L3VPN
- Overview
- MPLS L3VPN configuration task list
- Configuring basic MPLS L3VPN
- Configuring inter-AS VPN
- Configuring nested VPN
- Configuring HoVPN
- Configuring an OSPF sham link
- Specifying the VPN label processing mode on the egress PE
- Configuring BGP AS number substitution
- Enabling SNMP notifications for MPLS L3VPN
- Displaying and maintaining MPLS L3VPN
- MPLS L3VPN configuration examples
- Configuring basic MPLS L3VPN
- Configuring a hub-spoke network
- Configuring MPLS L3VPN inter-AS option A
- Configuring MPLS L3VPN inter-AS option B
- Configuring MPLS L3VPN inter-AS option C
- Configuring MPLS L3VPN carrier's carrier
- Configuring nested VPN
- Configuring HoVPN
- Configuring OSPF sham links
- Configuring BGP AS number substitution
- Configuring IPv6 MPLS L3VPN
- Overview
- IPv6 MPLS L3VPN configuration task list
- Configuring basic IPv6 MPLS L3VPN
- Configuring inter-AS IPv6 VPN
- Displaying and maintaining IPv6 MPLS L3VPN
- IPv6 MPLS L3VPN configuration examples
- Configuring MPLS L2VPN
- Overview
- MPLS L2VPN configuration task list
- Enabling L2VPN
- Configuring an AC
- Configuring a cross-connect
- Configuring a PW
- Binding an AC to a cross-connect
- Configuring PW redundancy
- Displaying and maintaining MPLS L2VPN
- MPLS L2VPN configuration examples
- Configuring VPLS
- Overview
- Configuration task list
- Enabling L2VPN
- Configuring an AC
- Configuring a VSI
- Configuring a PW
- Binding an AC to a VSI
- Configuring MAC address learning
- Displaying and maintaining VPLS
- VPLS configuration examples
- Configuring MCE
- Configuring IPv6 MCE
| Recognized languages: | English |
|---|---|
| Pages: | 349 |
| Size: | 15.39 MB |
Show table of contents
Document Outline
- Title Page
- Preface
- Contents
- CLI configuration
- What is CLI?
- Entering the CLI
- Command conventions
- Undo form of a command
- CLI views
- Using the CLI online help
- Typing commands
- Checking command-line errors
- Using command history
- Controlling the CLI display
- Configuring user privilege and command levels
- Saving the current configuration
- Displaying and maintaining CLI
- Login methods
- CLI login
- Overview
- Logging in through the console port
- Logging in through telnet
- Introduction
- Telnet login authentication modes
- Configuring none authentication for telnet login
- Configuring password authentication for telnet login
- Configuring scheme authentication for telnet login
- Configuring common settings for VTY user interfaces (optional)
- Configuring the SecBlade card to log in to a telnet server as a telnet client
- Displaying and maintaining CLI login
- Logging in to the SecBlade NS card from the host device
- NMS login
- User login control
- User login control overview
- Configuring login control over telnet users
- Configuring source IP-based login control over NMS users
- Interface configuration
- Ethernet interface overview
- General configuration
- Configuring a Layer 2 Ethernet interface or subinterface
- Configuring a Layer 3 Ethernet interface or subinterface
- Displaying and maintaining an Ethernet interface or subinterface
- Configuring a loopback interface
- Configuring the null interface
- Displaying and maintaining loopback and null interfaces
- IP addressing configuration
- IP routing basics configuration
- Static routing configuration
- Policy-based routing configuration
- VLAN configuration
- Isolate-user-VLAN configuration
- Layer 2 forwarding configuration
- Configuring general Layer 2 forwarding
- Configuring inline Layer 2 forwarding
- Configuring inter-VLAN Layer 2 forwarding
- MAC address table configuration
- ARP configuration
- Gratuitous ARP configuration
- Proxy ARP configuration
- ACL configuration
- NetStream overview
- IPv4 NetStream configuration
- IPv4 NetStream configuration task list
- Enabling IPv4 NetStream
- Configuring IPv4 NetStream filtering and sampling
- Configuring IPv4 NetStream data export
- Configuring attributes of IPv4 NetStream export data
- Configuring IPv4 NetStream flow aging
- Enabling DSA-TAG field parsing
- Displaying and maintaining IPv4 NetStream
- IPv6 NetStream configuration
- NetStream configuration examples
- Configuration considerations
- Configuring the host device and the SecBlade NS card
- IPv4 NetStream traditional data export configuration example
- IPv4 NetStream aggregation data export configuration example
- Using the sampler for IPv4 NetStream
- IPv6 NetStream traditional data export configuration example
- IPv6 NetStream aggregation data export configuration example
- Device management
- Device management overview
- Configuring the device name
- Configuring and displaying the system time
- Enabling the display of copyright information
- Configuring banners
- Configuring the maximum number of concurrent users
- Configuring the exception handling method
- Rebooting the device
- Configuring a scheduled task
- Configuring temperature alarm thresholds for a card
- Clearing the 16-bit interface indexes not used in the current system
- Identifying and diagnosing pluggable transceivers
- Displaying and maintaining device management
- NTP configuration
- Automatic configuration
- Introduction to automatic configuration
- Typical automatic configuration network
- How automatic configuration works
- FTP configuration
- FTP overview
- Configuring the FTP client
- Configuring the FTP server
- Displaying and maintaining FTP
- TFTP configuration
- File management
- Configuration file management
- Configuration file overview
- Saving the running configuration
- Setting configuration rollback
- Specifying a startup configuration file to be used at the next system startup
- Backing up the startup configuration file
- Deleting a startup configuration file to be used at the next startup
- Restoring a startup configuration file
- Displaying and maintaining a configuration file
- Software upgrade configuration
- Device software overview
- Software upgrade methods
- Software upgrade through a system reboot
- Software upgrade by installing hotfixes
- Displaying and maintaining software upgrade
- Software upgrade configuration examples
- System maintenance and debugging
- Information center configuration
- Information center overview
- Configuring information center
- Information center configuration task list
- Outputting system information to the console
- Outputting system information to a monitor terminal
- Outputting system information to a log host
- Outputting system information to the trap buffer
- Outputting system information to the log buffer
- Outputting system information to the SNMP module
- Outputting system information to the web interface
- Saving system information to a log file
- Managing security logs files
- Configuring synchronous information output
- Disabling a port from generating link up/down logging information
- Displaying and maintaining information center
- Information center configuration examples
- SNMP configuration
- MIB style configuration
- RMON configuration
- H3C network technology acronyms
- Index