H3C Technologies H3C S9500 Series Switches - Manual (Page 163)

Installation Manual
H3C S9500 Series Routing Switches
Appendix B Installation of B68 Cabinet
B-12
from the earth. In this case, remove all anchor plate parts to check whether the
insulating covering or insulating washer is installed or whether the insulating parts are
damaged. Afterwards, reinstall the anchor plate and repeat the insulation test. Figure
B-12 shows the installation of a single cabinet on the cement ground, and Figure B-13
shows the installation of two cabinets on the cement ground.
Figure B-12 Installation of a single cabinet on the cement ground