Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 60)

Using PanelBuilder
Chapter 3
3-24
Once you have selected an object or objects, press Enter to perform the
actual move. The cursor will appear at the upper left corner of the
object(s) selected. Use the arrow keys to move the object(s). When the
desired position is reached, press Enter.
Figure 3.22
The Rubber Band Box
20142
OBJECT MOVE: Select Deselect Group All Clear Row 12 Col 40
OBJECT MOVE: Select Deselect Group All Clear Row 12 Col 40
All selects every object on the screen.
Clear deselects all objects on the screen.
Recall
Choose Recall to add copies of one or more memorized objects to the
screen. If the recalled object(s) is on the same screen as the one that was
originally memorized, the two objects will overlap and look like a single
object until the recalled object(s) is moved.
If you memorize only one object, the Object menu opens for you to edit the
object as soon as the object is recalled. If you memorize more than one
object at a time, they will appear on the screen in Move and Size mode,
ready to be moved to whatever position you choose.
If two objects overlap, you will not be able to save the screen.