Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 45)

Using PanelBuilder
Chapter 3
3-9
Pass-Through Upload from PanelView (DH+ and Remote I/O)
allows you to upload PanelView files via a PLC-5 on a Data Highway+
and Remote I/O network. For more information on pass-through
download or upload, refer to Chapter 6, File Operations.
Burn EPROMs allows an application file to be copied into EPROMs
for installation onto a PanelView terminal. Before burning EPROMs,
refer to Chapter 6, File Operations.
Burn Single EPROM allows an application file to be burned into a
single EPROM for use with Series D or E terminals. This option must
also be used for upgraded older terminals with logic boards accepting
only one EPROM.
The Reports Menu
Choose Reports from the Main menu and the Reports menu appears. Use
this menu to generate printed reports of application files you have created.
For more information on reports and how to print them, see Chapter 6, File
Operations.
Figure 3.5
The Reports Menu
20012
MAIN MENU: Screens Windows Options Communicup Exit Reports
Select File
Directory
Quit
Select File presents a list of application files. Choosing any one will
open other menus where you can choose the types of reports you wish to
print, and choose a printer port.
Directory changes the directory setting, allowing you to locate files for
printing.
The Files Menu
Choose Files from the Main menu to open the Files menu. Use this menu
to copy, erase, rename, and move files to different disk directories.