Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 315)

The Objects
Chapter 10
10-50
The following PLC-5/15 rung shows how the data can be read into the
PLC controller and transferred to the corresponding Numeric Data Display.
Figure 10.10
Ladder Logic for Example 3
20383
MOV
MOVE
SOURCE: I:011
DEST: O:010
Enter Bit
I:010
] [
I:010
] [
0 1
To select which value to change, press the Interlocked Push Button beside
the value, and use the Numeric Keypad to enter the new value.
Text/Draw text and graphics objects are used for illustrating or labeling
screens. They are not associated with PLC or terminal functions, so there
are no data types or I/O addresses associated with them.
There are four Text/Draw objects.
Text
Text/Draw text is used for labels or titles which are independent of other
objects on the screen.
Do not confuse background text with object text. Object text, such as a
button’s label or the text in a list selector, is part of the object—if you
move the object, the text moves with it. Object text is added when you are
editing the object, whereas background text is an object on its own.
Line
Vertical and Horizontal Lines
Lines can be used for emphasis, to divide the screen, connect symbols, or
to represent physical devices like pipes or conveyors. You can draw
straight lines, polylines, boxes or polygons.
Text/Draw