Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 169)

Creating a Sample Application File
Chapter 5
5-55
11. Open the Exit menu, and choose Exit and Save object. You are
returned to the Numeric Data Display menu.
Create the Remaining Four Numeric Data Displays
1. Press Esc three times to close the Numeric Data Display, Numerics
and Add menus.
2. Choose Memorize. Put the cursor on the Numeric Data Display and
press Enter.
Figure 5.72
Memorize
20102
SCREEN MENU: Add Edit Move Delete Memorize Recall Options Exit
3. Choose Recall. A copy of the Numeric Data Display is placed
directly on top of the existing Numeric Data Display.
Figure 5.73
Recall
20103
SCREEN MENU: Add Edit Move Delete Memorize Recall Options Exit
4. Choose Move & Size, then choose Move. Position the Numeric Data
Display one row below the previous Display and press Enter. The
correct positions for the remaining four Numeric Data Displays are:
Row 12, Column 43
Row 13, Column 43
Row 14, Column 43
Row 15, Column 43
5. Choose Address from the Object menu and define the address for
each Numeric Data Displays. The correct addresses are:
B O 1 1/0 thru 1/15 with the BCD Data Type