Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 160)

Creating a Sample Application File
Chapter 5
5-46
d. Set the Number of States to 5.
e. Choose Edit Text and define the five lines of text for:
CROSSOVER
MAIN
OUTPUT
INPUT
BACKUP
Remember to use the arrow keys to move the cursor to the next line,
and only press Enter when you’ve typed in all five lines of text.
9. Choose Quit or press Esc to return to the Object menu.
10. Choose Address from the Object menu.
11. Choose Selector Control Address from the Address menu.
Figure 5.62
The Selector Control Address Menu
22095
Selector Control Address
Current Address Unassigned Address
Current Preset
Data Type Binary
Communications Discrete
Input/Output Input
Rack 1
Start Word 0
Start Bit 1
Number of Bits 1
Top Position Value 0
Update Address
Change Preset
View Address Map
Delete Address
Quit
The addresses for the Control List Selector are on the Object Address
List in Chapter 4 (see
Figure 4.15 ). It is a four-bit bit-position
address.
IMPORTANT: Remember that all bits off is a valid state (state 0).
a. Choose Data Type and then Bit.
b. Choose Communication and then Discrete.