Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 113)

Planning Your Application
Chapter 4
4-38
Figure 4.18
PLC Communications Worksheet for the Sample Application
PLC Communications Worksheet
Application File Name:
PLC/Scanner Type:
Baud Rate: 57.6K (10,000 Ft) 115.2K (5,000 Ft) 230.4K (2,500 Ft)
Note: You must make at least one rack assignment. Additional rack assignments (up to a maximum of 8)
are optional. Write in the Rack Number and circle appropriate Rack Size, Starting Module Group, and
Last Rack designation.
Rack Assignments
Rack Number Rack Size Starting Module Group Last Rack
1/4 1/2 3/4 1
0 2 4 6 Y N
Note: Block Transfers are optional. Circle the Block Transfer File Number, write in one of the rack numbers
from above, circle the appropriate Module Group and Byte, and fill in the Block Transfer file size.
Block Transfer Assignments
Block Transfer
File Number Module Group
0 1 2 3 4 5 6 7 Hi Lo
30
Byte
Rack
Number No. Words
0 1 2 3 4 5 6 7
0 1 2 3 4 5 6 7
0 1 2 3 4 5 6 7
Pass–Through
1
2
4
5
0 1 2 3 4 5 6 7 3
0 2 4 6 Y N
1/4 1/2 3/4 1
0 2 4 6 Y N 1/4 1/2 3/4 1
0 2 4 6 Y N
0 2 4 6 Y N 1/4 1/2 3/4 1
0 2 4 6 Y N 1/4 1/2 3/4 1
1/4 1/2 3/4 1
0 2 4 6 Y N 1/4 1/2 3/4 1
0 2 4 6 Y N 1/4 1/2 3/4 1
Hi Lo
Hi Lo
Hi Lo
Hi Lo
Sample Application
PLC 2/30 1771 – SD2