7ć38, Information and alarm windows chapter 7, Alarm qty/time reset to plc controller – Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL User Manual
Page 246

Information and Alarm Windows
Chapter 7
7-38
a Screen Selector
a PLC controlled screen change
the Alarm History screen
the Full Alarm Window
Figure 7.31
The Alarm Status Screen Menu
22598
FILE MENU Screens Windows Options Communications
128
Exit
Windows
Alarm Window
254
Enable
Information Window
Enable
Terminal Fault Window
Alarm History Screen
Alarm Status Screen
Numeric and Security Entry Window
Quit
Alarm Status Screen
Screen Number
254
Foreground Color
Black
Background Color
Cyan
PLC Controlled QTY/Time Reset
Disable
QTY/TIME Reset Button
Enable
QTY/TIME Reset to PLC Controller
Enable
Quit
Enable
Disable
Alarm QTY/TIME Reset to PLC Controller
The QTY/TIME Reset to PLC Controller is available in PanelBuilder
Version 5 and later.
To activate the Alarm QTY/TIME to PLC Controller Reset, select the
QTY/TIME Reset to PLC Controller option in the Alarm Status Screen
Menu. This option allows you to define a PLC address that indicates to the
PLC when an Alarm Status QTY/TIME reset has occurred.
To define the PLC address, select Enable. An address definition window
pops up (see Figure 7.32). In this window you define the PLC Input
address that is set when the Alarm Status QTY/TIME is reset. The options
are described below.