Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 181)

File Operations
Chapter 6
6-7
Alarm Messages prints the entire list of alarm messages entered
for the Alarm List Window, or a range of messages.
Information Messages prints the entire list of messages entered
for the Information Window, or a range of messages.
Local Messages prints the entire list of messages created for the
Local Message Display objects, or a range of messages.
Computer Setup prints all the configuration settings for the
PanelView terminal type, printer port, PanelView terminal port,
and EPROM burner port.
5. Once you have chosen the options you want to document, choose
Quit to return to the Select File menu.
6. Choose Report Destination to specify where you want the report to be
printed. To send the report to a printer, choose the port (COM1 or
COM2) your printer is attached to. To save the report as an ASCII
text file, choose File. The File window will open, showing the name
and path of the file to be saved. The default file name is the name of
the application file, and the default directory is the application file
directory. The file extension is .RPT. You can change the name and
the path, but not the extension.
Table 6.A
Printer Communication Port Settings Available in PanelBuilder
Port COM1 COM2 LPT1 not configurable LPT2 not configurable
Baud Rate 110 300 600 1200 2400 4800 *9600 19200
Parity odd even *none
Data bits 7 *8
Stop bits *1 2
*default settings
7. Choose Print FILENAME (where FILENAME is the name of the
application file you selected in step 3) to print the specified reports.
If you try to print when the printer is off-line or out of paper, there may be
long delays, and PanelBuilder may not respond to attempts to abort
printing. If this occurs, put the printer back on-line (press the ONLINE
button and verify the ONLINE indicator, reload the printer with paper and
put it back on-line, or momentarily power-down and power-up the printer).