Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 180)

File Operations
Chapter 6
6-6
addresses with the same starting address, by their ending
address, in numerically increasing order
PanelBuilder will verify that the addresses specified are within the
allowable range, and that the starting address is less than the
ending address.
Screens allows you to print the image of one specific screen, or a
range of screens, within the application.
IMPORTANT: When printing a screen print, all special graphic
characters with an ASCII code of less then 20 (32 decimal) are
represented by blanks. In addition, arrow heads (such as those used
in cursor points) are printed as ASCII character 254. Refer to
Appendix E, The Extended Character Set.
Object List allows you to list objects and associated information
for the entire application or for a range of screens within the
application. In the Object List menu, you can choose between two
Object List reports, a brief report that summarizes the key
information, and the full report. (See
Figure 6.7 for an illustration
of these reports.) Another option also allows you to disable
printing of background text objects.
Figure 6.6
Object List Menu
23629
Object List
All Screens
Starting Screen
Ending Screen
Include Background Text Objects? Yes
Report Format Brief
Quit
Function Key Usage (Keypad terminals only) allows you to print
a list of the function keys and associated objects names and type
assigned to each screen. Unassigned function keys will be
included, but the Object Name and Type fields will be blank.
Alarm Window prints all the configuration settings for the Alarm
Window.
Information Window prints all the configuration settings for the
Information Window.