Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 159)

Creating a Sample Application File
Chapter 5
5-45
b. Size the button to Width 6, Height 3.
c. Link the button to Function Key 3.
d. Edit the text so the button is labeled UP.
e. Choose Quit or press Esc to return to the Buttons menu.
5. Choose Down Cursor (Incr Value) and then choose Enable. You are
presented with the Down Cursor (Incr Value) menu. From this menu:
a. Move the cursor to Row 21,Column 23.
b. Size the button to Width 6, Height 3.
c. Link the button to Function Key 11.
d. Edit the text so the button is labeled DOWN.
6. Choose Quit or press Esc to return to the Buttons menu.
7. Choose Quit or press Esc to return to the Object menu.
8. Choose List from the Object menu.
Figure 5.61
The List Menu
20094
List
Move
Width
Number of States 4
Edit Text
Move Text
Border Single
Quit
From the List menu:
a. Move the list to Row 11, Column 24.
b. Set the Border to None.
c. Set the Width to 11. You define the width of a list by using the
right arrow and left arrow, just as you’d size any other object.
However, you set the height of the object by specifying the
number of states.