Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 36)

Installing PanelBuilder
Chapter 2
2-8
Figure 2.3
The PanelView Firmware Version Number
23593
Up
Cursor
Firmware Rev 05.00.00 06/21/93 (050900) 06/21/93 05:36:59 AM
Application File Name: DEMO 10801 Bytes Used, 52175 Bytes Free
CONFIGURATION MODE MENU
"
Down
Cursor
Enter
Internal Version Number
Date Identification
and Software Version
Upload / Download
Serial Port
Rack Assignments
Access Codes
Audio Response
Alarm Relay
Preset Operations
Time and Date
Screen Saver
Screen Alignment
Stuck Button Timeout
User EPROM/EEPROM Power-up Test
Pass-Through Download Options
Unit Tests
In Figure 2.3 the Firmware Rev. 05.00.00 indicates version 5. Version 1
firmware is shown as 01.xx.xx., version 2 as 02.xx.xx, version 3 as
03.xx.xx and version 4 as 04.xx.xx.
Compatibility Reports
PanelBuilder can print a report listing all objects and global functions in an
application file. The report lists all screens and all objects used in a file.
More important for those with older terminals, the object listing shows the
version of firmware that is required for each object. With this report, you
can identify which objects must be removed or modified to make an
application file compatible with older terminals.
For details on how to print reports, see Chapter 6, File Operations.