Information and alarm windows chapter 7 – Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL User Manual
Page 242

Information and Alarm Windows
Chapter 7
7-34
When the Alarm History screen is called up by a screen selection object on
another screen, it replaces that screen.
When the Alarm History screen is called up from the Alarm Status screen,
it replaces that screen.
Figure 7.29
The Alarm History Screen
22604
Cursor
Down
this is an alarm message
01:47:13 AM 11/15/89
this is an alarm message
01:47:13 AM 11/15/89
this is an alarm message
01:46:55 AM 11/15/89
this is an alarm message
01:42:12 AM 11/15/89
this is an alarm message
01:42:12 AM 11/15/89
this is an alarm message
12:01:24 AM 11/11/89
01:47:05 AM 11/15/89
this is an alarm message
12:01:24 AM 11/11/89
01:47:05 AM 11/15/89
this is an alarm message
12:01:24 AM 11/11/89
History
Acknowl
Alarm
Cursor
Up
The Alarm History screen provides a record of the last 21 alarms that have
occurred. If more than 21 occur, the oldest alarm records will be lost,
unless the messages have been sent to a printer.
The Alarm History screen is pre-assigned screen number 255, although
that number can be reassigned. To view it, use any screen selection object.
For example, you could place a “Go To Screen” button, configured to call
Screen 255, on any screen. The operator could then view the Alarm
History screen even if the Alarm window wasn’t displayed.
IMPORTANT: The Alarm History screen is pre-assigned screen number
255. In Version 1, the screen number is fixed at 255; in later versions this
can be changed. Changing the number makes an application file
incompatible with Version 1 terminal firmware.
The Alarm History screen contains the following buttons:
Print History sends the Alarm History information to a printer
Status opens the Alarm Status screen