DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 82)

DriveRight FMS User's manual
Set Speed Range
See also:
Mapping Quick Reference Menu
DriveRight FMS Mapping Requirements
Back to Menu Commands
Home | Getting Started | Quick Reference | Menu Commands | Troubleshooting
DriveRight FMS Mapping Requirements
The following equipment and software are required to use DriveRight FMS mapping functions:
 For DriveRight 600:
 DriveRight 600 (# 8156)
 DriveRight GPS Module (# 8157)
 For DriveRight 600
E :
 DriveRight 600e ( # 8126)
 DriveRight GPS/Wireless Interface Module (# 8127)
 GPS Module (# 8128)
 For CarChip Fleet Pro:
 CarChip Fleet Pro (# 8246)
 CarChip GPS/Wireless Interface Module (# 8251)
 GPS Module (# 8128)
 MapPoint Mapping:
 Microsoft MapPoint 2002, 2004, or 2006
Note: Davis Instruments recommends that you do not use MapPoint version 2009.
This version is not compatible with FMS version 3.9.2.
 In addition to the system requirements for DriveRight FMS 3.2 or later, Microsoft
recommends a minimum of 64 MB of memory to run MapPoint.
 MS MapPoint or MapPoint Control Run-Time must be installed on the computer running the
DriveRight FMS.
 Google Mapping:
 Google Earth TM and a web browser (Internet Explorer, Firefox, or Safari)
 an internet connection
70