DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 131)

DriveRight FMS Help
To edit the Default DriveRight Settings:
1. Select Default DriveRight Settings in the Setup Menu.
2. Select Setup Wizard from the list of commands. The Default DriveRight Wizard dialog
box is displayed.
3. If you select OK, the Default DriveRight Settings Wizard takes you through the dialog
boxes listed below:
 Unit Settings : Select the date, time and unit modes and click OK.
 Safety Settings : Enter the speed, acceleration and deceleration limits and click
OK.
 Timer Settings :Enter the trip stop time and driver log out time and click OK.
 Alarm Settings : Select the alarm mode. Warn if not logged in is an option.
 Security Settings : Enter the security code (PIN code). Tamper indicator is an
option. Disable Console Login is also an option.
 GPS Settings: Create default GPS settings that can be used by all the vehicles in
your fleet.
4. Once you are finished with the above five dialog boxes, a tab control dialog box appears
with all the above six dialog boxes. You can navigate through them, change any of the settings,
and save the settings by clicking OK.
119