Driveright settings, Driveright settings: verify driveright calibration, Verify driveright calibration – DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 42

DriveRight FMS User's manual
See also:
Back to
|
DriveRight Settings
The following commands allow you to view and or change the settings on a DriveRight device:
Back to
|
DriveRight Settings: Verify DriveRight Calibration
The Calibrate DriveRight dialog box allows you to verify DriveRight calibration settings.
The
Calibration Setting dialog box shows two installation methods. VSS (vehicle speed
sensor) installation and Reed Switch.
To verify the DriveRight console calibration:
1. Click
on
DriveRight Settings from the DriveRight Menu.
2. Select Verify DriveRight Calibration from the drop-down menu. A DriveRight
Calibration Message dialog box is displayed.
3. Click
OK, Set or Cancel to continue, depending on the displayed message. The
Calibrate DriveRight dialog box is displayed.
30