DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 182)

DriveRight FMS User's manual
5. Set the Driver ID Logout Time in minutes. Use a logout time of "0" to never log out the
driver. The Driver ID Logout Time is the number of minutes that elapse after a vehicle
stops before the driver is logged out of the DriveRight.
6. Click Set to save the settings, click Cancel to exit without saving the settings, or click on
another tab to make additional changes to the DriveRight default settings.
See Also:
Identification Settings
Calibration Settings
Unit Settings
Safety Settings
Alarm Settings
Security Settings
GPS Settings
Back to Transfer to DriveRight | SmartCard Menu
Home | Getting Started | Quick Reference | Menu Commands | Troubleshooting
Safety Settings - SmartCard
Use this command to create safety settings for the specified DriveRight.
To set safety settings:
1. Select Transfer to DriveRight from the SmartCard Menu.
2. Select Settings from the Transfer to DriveRight submenu. The Review Settings for
SmartCard dialog box is displayed.
3. Select the Safety Tab near the top of the dialog box.
170