Safety settings – DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 135
DriveRight FMS Help
Back to
Default DriveRight Settings - View/Set
|
Safety Settings
Use this command to create default DriveRight safety settings.
To set default safety settings:
1. Select
View/Set from the Default DriveRight Settings submenu from the Setup menu
The Default DriveRight Settings dialog box is displayed.
2. Select the Safety Settings tab near the top of the dialog box. The safety options are
displayed.
4.
Set the Speed Limit, which is the maximum allowable vehicle speed.
5.
Set the Accel Limit, which is the maximum allowable rate of acceleration.
6.
Set the Decel Limit, which is the maximum allowable rate of deceleration.
7. Click
OK to save the settings, click Cancel to exit without saving the settings, or click on
another tab to make additional changes to the DriveRight default settings.
See also:
123