Downloading requirements – DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 44
DriveRight FMS User's manual
To setup GPS logging:
1. Select
DriveRight Settings from the DriveRight Menu.
2. Select
Setup GPS from the DriveRight Settings drop down list. The Setup GPS
Logging Interval dialog box is displayed.
3.
Set GPS Logging to On, Off, or DriveRight Speed Only.
o Select On to enable GPS logging.
o Select Off to disable GPS logging.
o Select DriveRight Speed Only to log the DriveRight speed without the GPS
coordinates. No GPS unit is required to enable this option.
4.
Enter the desired logging interval and indicate a time unit of either seconds (Sec) or
minutes (Min). Logging Hours indicates how much data can be stored at the selected interval.
5. Click
Set to save the changes or click Cancel to exit without changing the settings
Back to
|
Downloading Requirements
You cannot download a DriveRight if any of the following conditions exist:
DriveRight not present in the database.
DriveRight not assigned to a Vehicle.
Note: The same conditions also apply to Host Mode and Palm Download.
Back to
|
32