DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 179)

DriveRight FMS Help
Calibration Settings - SmartCard
Use this command to modify and edit the calibration settings for a specified DriveRight device.
The calibration settings control how the DriveRight device is calibrated and monitoring the
selected vehicle.
To select the calibration settings:
1. Select Transfer to DriveRight from the SmartCard Menu.
2. Select Settings from the Transfer to DriveRight submenu. The Review Settings for
SmartCard dialog box is displayed.
3. Select the Calibration Settings tab near the top of the dialog box. The calibration settings
options are displayed.
4. Describe the installation method or the type of connections/hookups used to connect the
device to the vehicle in the Installation Method group box.
5. Click Set to save the calibration settings, click Cancel to exit without saving the settings,
or click on another tab to make additional changes to the DriveRight default settings.
See also:
Identification Settings
Unit Settings
Safety Settings
Timer Settings
Alarm Settings
Security Settings
GPS Settings
167