DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 184
DriveRight FMS User's manual
To set default alarm settings:
1. Select
Transfer to DriveRight from the SmartCard Menu.
2. Select
Settings from the Transfer to DriveRight submenu. The Review Settings for
SmartCard dialog box is displayed.
3. Select the Alarm Settings tab near the top of the dialog box. The alarm settings options
are displayed.
4.
Set the Alarm Mode to On or Off. This controls audible alarm reporting by the DriveRight
device.
5.
Enable "Warn if not Logged in" to have the DriveRight device give an audible alarm if the
vehicle is operated without the driver first entering his or her driver code.
6. Click
Set to save the alarm settings, click Cancel to exit without saving the settings, or
click on another tab to make additional changes to the DriveRight default settings.
See also:
Back to
|
172