DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 164

DriveRight FMS User's manual
If a CarChip Fleet (#8241 or 8245) is connected, the options are limited. The GPS option
is not available for these models.
2.
Edit the default settings for Hard Braking, Acceleration, and Speed Bands.
CarChip settings for Hard Braking Threshold, Hard Acceleration Threshold, and Speed
Band 3 are equivalent to the DriveRight settings for Decel Limit, Accel Limit, and Speed
Limit.
Set the Hard Braking Threshold to equal the Decel Limit used by DriveRight devices.
Set the Hard Acceleration Threshold to equal the Accel Limit used by DriveRight devices.
Set Speed Band 3 to equal the Speed Limit used by DriveRight devices.
3. The
dialog box displays. Select either Vehicle with standard
OBDII capabilities or one of the other choices.
4.
Set the default Alarm Status for all CarChips. If the CarChip is a CarChip Fleet Pro, you
have the choice of three volume settings and disabling the alarm feature. If the CarChip is a
CarChip Fleet, you have the choice of Medium and Disabled.
5.
Set the default LED Status for all CarChips. If Enabled, the green LED on the CarChip
flashes when first plugged into a vehicle and flashes continuously when the vehicle is running. If
Disabled, the green LED does not flash while in the vehicle.
6.
Set the Logging Interval for the Vehicle Speed Parameter and select up to four other
engine parameters
. Supported Time intervals range from 1 second to 60 seconds.
152