Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 71)

<4. Display and Operations while Connected to GC8000>
4-24
IM 11B06C01-01E
4.3.21 Peak Setup Dialog Box
To set peaks, select the Peak submenu from the Setup menu. The Set Peak dialog box appears.
The Set Peak window consists of six tab windows: Peak Name, Gate Time, Result Unit/
Measuring Range, Ref Stream/Ref Peak, Gate Cut Method/Integ Method, and Calib. Settings.
The following explains the operations common to each window of Set Peak dialog box. The
options of each tab are explained in Subsection 4.3.22 and later.
Selecting Settings Window
with the Appropriate Tabs
Selecting Stream. System.
and Peak Numbers
Displaying Detector Number
and Processing (Details) Specified
Change button
Close button
Figure 4.28 Common items of Set Peak dialog box (Peak name)
In this dialog box, you can set a stream number, system number, and peak number options.
After you have changed the settings, click the Change button. A confirmation message asking
“Are you sure to change the settings?” is displayed in the message box. When you respond with
“Yes”, the settings are changed.
You can select stream numbers and system numbers of the current GCM only.
Also, you can select only the peak number assigned to the detector of the selected system
number.
CAUTION
If you change a system number, a stream number or a peak number without sending this change,
your change is discarded. Similarly, if you select another tab without sending your change, this
change is discarded.
5th Edition : Nov. 16, 2011-00